PFCL201C 50KN

Don't panic when you see this. Although there are many types, many can actually be classified into one category, and not all of them are commonly used. For beginners, it is still the same sentence. First, master the commonly used ones and let the frequency converter run. Don't try to understand all the parameters at first, otherwise you will definitely not learn. This sentence was emphasized in the previous article, and I will emphasize it again here.

It is worth mentioning that when the i550 motec, m550 motor, and g500 gearbox are combined, due to their perfectly coordinated interface, they can flexibly achieve excellent energy-saving driving solutions, ensuring optimal performance and energy efficiency during operation.

Energy saving effect: The new Kerui frequency converter is used in the main fan to control wind speed, effectively changing the output of air volume and pressure, achieving the goal of energy conservation. The use of a fan as a frequency converter load device directly affects the speed of the fan. From the perspective of fluid science, the relationship between rotational speed and flow rate is proportional, the pressure of the fluid is proportional to the square of rotational speed, and the shaft power P is proportional to the cubic power of rotational speed. From the practical effect, it can be seen that the speed of the fan has been reduced by half,

 and the natural energy consumption has also been reduced by one eighth, indicating that the gearbox has achieved energy-saving of the main ventilation fan. Moreover, most coal mines use a fan to drive two motors, so based on this feature, one frequency converter can simultaneously control the normal operation of both motors. Regardless of the driving method used to control the power of the frequency converter, the total power cannot be smaller than the sum of the two motors.

By using the i550 MOTEC frequency converter, Lenz can achieve transparency in the process from the transmission shaft to the cloud for our customers and support their digital transformation.

The IO Link master station function equipped with the i-series MOTEC frequency converter provides real-time recognition and diagnostic data from sensors, allowing for easy data exchange between IO Link sensors and actuators. By using Drive DataHub to connect to the cloud, it also saves additional hardware and installation costs, and performs well in status monitoring or predictive maintenance.

Today we will explain an important concept of frequency converters: frequency sources, and some brands may refer to them as given channels. In fact, what we are talking about is the same thing. Previously, as long as a running command was given to the frequency converter, it was already running. However, if the frequency was not given and the frequency was set to 0 at this time, even if the frequency converter was already running, the motor would not rotate due to the output frequency of the frequency converter being 0. Therefore, in general, both the command source and frequency source need to be given simultaneously. The command source is responsible for starting and the frequency source is responsible for controlling the speed, Only in this way can a frequency converter be used to control the motor for speed regulation.

Contact information: 15359293870

WhatsApp:+86 15359293870

Contact person: KELLY

Email: geabbdcs@gmail.com   386353502@qq.com

Official website:

4 digital inputs, 1 analog input, and 1 relay output.

Product specifications:

Starting torque: 180% at 3 Hz, 200% at 5 Hz (vector)

Carrier frequency: 1-15 KHz

Control method: SVPWM, V/F control, magnetic flux vector control

Output frequency: 0-650.00 Hz

Starting torque: 180% at 3 Hz, 200% at 5 Hz (flux vector)

Protection function: output short circuit, overcurrent/voltage, low voltage, motor overheating, IGBT overheating, grounding/leakage, communication abnormality protection

Cooling method: 0.4KW product natural cooling, other air cooling

Display functions: output frequency, output current, output voltage, output power, alarm recording (up to 12 sets), etc

LED light: frequency monitoring, voltage monitoring, current monitoring, motor operation indication, control mode indication, external operation panel indication

Surrounding temperature: -10~+50 ℃ (unfrozen)

Surrounding humidity: below 90% Rh (without condensation)

Storage temperature: -20~+65 ℃

Protection level: IP20

Related models:

ACS310-01E-02A4-2

ACS310-01E-04A7-2

ACS310-01E-06A7-2

ACS310-01E-07A5-2

ACS310-01E-09A8-2

ACS310-01U-02A4-2

ACS310-01U-04A7-2

ACS310-01U-06A7-2

ACS310-01U-07A5-2

ACS310-01U-09A8-2

ACS310-03E-01A3-4

ACS310-03E-02A1-4