IS220PDIAH1B control system

[The content of this link is sourced from brand manufacturers]

Phoenix PHOENIX Safety Module PSR-SPP-24DC/TS/S

Product Overview:

The freely configurable safety module has 20 safety inputs and 4 safety outputs, 4 signals, 2 clocks, and 2 grounding switch outputs, which can be diagnosed through the bus gateway and meet SIL 3, Cat Category 4/PL e, SIL 3 safety level, EN 50156, pluggable direct plug-in terminal blocks

Product specifications:

Product Type: Safety Equipment

Number of available expansion modules: 1 (maximum continuous current through PSR-TBUS: 4 A)

Overvoltage category: III

Pollution level: 2

Response time: maximum 30 ms (plus response time of PSR-TS-SDOR4)

Recovery time:<10 seconds

Maximum power consumption under rated conditions: 6372mW (at a=20, b=2, c=4, e=2, Iclock=100mA, Isignal=100mA, IOut/GND=2A, IOut/Out=2A)

Rated operating mode: 100% meets the conditions

Interface: USB

TBUS DIN rail for expansion modules and bus couplers

Rated control circuit power voltage US: 18 V DC 30 V DC (including all tolerances, including residual voltage)

Rated control circuit power voltage US: 24 V DC (A1/A2)

Rated control power supply current IS: typical value 110 mA

Limit continuous current: maximum 6 A (for loop current paths A1/A1 and A2/A2)

Delay time: typical value of 20 ms (depending on load, in case of voltage drop of US)

Contact information: 15359293870

WhatsApp:+86 15359293870

Contact person: KELLY

Email: geabbdcs@gmail.com   386353502@qq.com

Official website: http://www.geabb.com

Mechanical life: 10000000 operations

Installation: DIN rail quick installation according to EN 60715

Terminal connectors: hard or flexible

Screw terminal M20 x 1.5

Cable cross-section: 0.25 mm 2

Cable cross-section: 2.5 mm 2

Tightening torque of clamp: 0.6 Nm

Width: 22.5 mm

Height: 100 mm

Depth: 121 mm

Shell protection level: IP40

Gap protection level: IP54

Protection level of clamp and terminal: IP20

Ambient temperature: -25+ 60 ℃

Storage and transportation temperature: -40 ℃

Storage and transportation temperature:+85 ℃ MAX

Vibration resistance according to EN 60068-2-6:10 55 Hz, amplitude 0.35 mm, ± 15%

Impact resistance: 30 g/11 ms

Rated impulse withstand voltage: 4 kV

Conduction resistance: 40 Ω

Voltage, application category DC-12:24 VDC

Current, application category DC-12:0.1 A

Related models:

SRB211AN (V.2)

SRB211ST/CC (V.2)

SRB219IT-24VAC/DC