High performance aluminum material friction plate for CX250 brake

High performance aluminum material friction plate for CX250 brake

Pneumatic friction caliper disc brake is composed of cooling fan, friction pads, friction plate, air pipe and etc. This friction plate is made of aluminum material with high performance. There are some holes on the surface of steel plate, so it is easy for heat dissipation during working.

Steel friction cooling steel disc is one part of DBK250, it is a spare part of this pneumatic friction brake with good heat dissipation. This steel disc is full of cooling holes with spiral shape, with these characters, so DBK250 pneumatic caliper disc brake's steel disc is good for heat dissipation.

The original braking disc of pneumatic caliper disc brake represents best performance, safety and durablity. This braking disc spare part with fan cooled structure, it is good for heat dissipation, so as to gurantee the best performance for pneumatic disc brake in any working situtation.

This steel material braking disk with many holes on the plate, so it is good for heat dissipation during working. The cooling holes spiral distribution like fan blades, it is benefit for multiple caliper disc brake heat dissipation. With this structure, it can prolong disk brake's service life greatly.

As usually, this air applied caliper disc brake matched braking disc regular diameter is 250mm, while 200mm, 300mm, 400mm and 500mm are available if needed. Thickness of it is 10mm and 20mm for choose. Braking disc diameter different, its creat braking force is different, too. Handong made pneumatic caliper disc brake is with high performance, it can replace RE CX250, CX300, CX400 and CX500 combiflex modulars friction pneumatic brake completely.

Modular caliper disc brake is extensive applied in aluminum foil, tissue, carton board, paper, plastic film, wire & cable, packing, printing, tire and other industries. For the paper roller winding and unwinding, it is can be used a brake and tension controller as needed.

From above usage case, we can see that it is DBK250.4 pneumatic caliper disc brake with four points applied in paper making machine, there are four pieces of air ports on the top of brake. In this case, DBK250.4 DBR254 is matched with mechanical chuck for paper sheet or paper roller tension control, they are controlled by air pressure.