Air oil transformer cooperated with hydraulic oil brake

Air oil transformer cooperated with hydraulic oil brake

Normally, BST air oil transformer is cooperated with DBM hydraulic oil brake, BST booster can improve DBM brake's braking force in a certain degree. BST hydraulic booster can transform air pressure to oil pressure for DBM hydraulic brake via a transparent plastic pipe, making it braking force in twice or quadruple. DBM-10 and DBM-20 hydraulic brake can worked with BST-2 or BST-4 for power increasing as needed.

DBM hydraulic caliper disc brake is normal releasing brake, it is driven by oil pressure. As usually, this brake is in released status, after supplying oil pressure, this hydraulic brake will clamp steel plate fastly and make it stopped immediately.

DBM hydraulic brake is an easy operation brake, it is stable, economic and high braking power. It can be used in dry and wet working situation, such as oil pump. DBM hydraulic caliper disc brake is also a kind of friction brake, it is applied to clamp steel plate for stopping.

DBM hydraulic caliper disc brake is a kind of caliper disc brake, it is driven by oil pressure with DOT3 or DOT4 hydraulic braking oil. It has two types, right "R" and left "L". So when you order this product, please indicate which type you need in advance. DBM10R, DBM20R means the oil source is input through right side, DBM10L, DBM20L means the oil source is input through left side. DBM10 is suitable for clamping steel disk thickness 10mm, and DBM20 is suitable for clamping steel disk thickness 20mm.

This hydraulic brake can produce high braking power, it is widely applied in crane, elevator, lifter and etc. Following is the detail technical data of them for your reference:

From above technical data we can understand that size of DBM10 and DBM20 is very similar, mainly difference is their clamping steel disk thickness. DBM10 is suitable for 10mm, and DBM20 is suitable for 20mm. No matter braking steel disc thickness is 10mm or 20mm, their braking force is the same. 

From above "air pressure versus torque" table we can see that, DBM10 and DBM20 braking power is the same, while braking disc diameter larger, its braking power is larger, too. So we can understand that this brake's braking force is determined by oil pressure, braking disc plate diameter. Braking disc thickness is not influence for braking force.

Air oil transformer and hydraulic oil brake can be used in dry and wet working situation. They are extensive applied in oil pump, amusement park ride, building construction machine, centrifugal machine, canning machine, cranes, electrical equipment, flood gate water treatment, iron making machine, machine tool, wind/hydraulic force machine, paper processing machine, power machine, rubber machine, railway car, wire rod machine, automatic labor-saving machine, common trolley, chemical machine, conveyor, elevator, textile machine, environment machine, lift, elevator, automatic packaging machine, plastic machine, press machine, robot machine, vessel, vehicle, windmill and etc.

In this case, BST-4 air oil transformer and DBM hydraulic brake are applied in oil pump, BST-4 making DBM hydraulic caliper disc brake's braking force in quadruple. DBM hydraulic brake is made by Handong company with superior quality, it will not leak oil and can be used in oil working situation without slippage.