Module de sortie numérique Triconex DO2401

Module de sortie numérique Triconex DO2401

Paramètres techniques

1. Paramètres électriques

Tension de fonctionnement : 220VAC /DC (selon le suffixe du modèle, par exemple DO2401-220VAC)

Consommation d'énergie : La valeur typique est d'environ 5W

Type de sortie : Contact sec (sortie relais) ou sortie statique (selon le modèle spécifique)

Capacité de contact

Sortie relais : Typiquement 5A @ 250VAC/30VDC

Sortie statique : environ 1A @ 24VDC (veuillez vous référer au modèle spécifique)

Temps de réponse :

Type de relais :<10ms (action time)

Solid-state type:<1ms

2. Channel configuration

Number of channels: Usually 16 channels/module

Isolation method: Electrical isolation between channels, isolation voltage ≥1500VAC

Diagnostic function: Supports channel-level fault detection and can provide abnormal status feedback through LED indicator lights or the system

3. Mechanical parameters

Size: Standard VME or CompactPCI card size (depending on the module version)

Weight: Approximately 0.5kg (excluding the heat sink)

Installation method: Rack-mounted, in compliance with industrial standards

Shell material: Metal or high-strength engineering plastic

4. Environmental parameters

Operating temperature: -40°C to + 70°C (industrial grade)

Storage temperature: -55°C to + 85°C

Humidity range: 5% to 95% RH (no condensation)

Protection grade: IP20 (Module level)

Anti-vibration: Complies with IEC 60068-2-6 standard (10-2000Hz)

Impact resistance: Complies with IEC 60068-2-27 standard (15g, 6ms)

5. Communication and Protocol

Communication interface: Supports the internal bus of the Triconex system (such as Triconnet)

Protocol support: Compatible with the Triconex control system protocol, it can be integrated into a redundant architecture

Diagnostic interface: Supports Modbus RTU/TCP (optional) or dedicated diagnostic protocols

6. Security Certification

Safety integrity level: Complies with the requirements of IEC 61508 SIL Level 3

Certification standards: ATEX, IECEx, CSA, FM, etc. (Depending on the model and application scenario)

Redundant design: Supports triple Modular Redundancy (TMR) architecture to ensure fault safety

7. Application Scenarios

Applicable industries: petrochemical, power, metallurgy, pharmaceutical, rail transit, etc

Typical applications: Emergency Shutdown system (ESD), Combustion management system (BMS), process control valve drive, motor control, etc

8. Compatibility

System compatibility: Compatible with series controllers such as Triconex Tricon, TriStation, and Trident

Software support: Configuration and diagnosis can be carried out through Triconex dedicated configuration software (such as TriStation 1131)

Notes:

The specific parameters may vary slightly due to the model suffix (such as DO2401-XXX) and production batch. It is recommended to refer to the official technical manual.

The module needs to be used in conjunction with the Triconex redundant control system to achieve high availability and safety.

When used in flammable and explosive environments, models that meet the corresponding explosion-proof certifications should be selected