Product Description
I. Product Overview
Schneider TM251MESE is a high-performance logic controller in the Modicon M251 series, specially designed for industrial application scenarios with modular and distributed architectures. In the field of industrial automation, it provides reliable control support for various complex production processes with its excellent performance and rich functions.
In terms of appearance, TM251MESE has a compact and reasonable layout, with clear identification of various interfaces and components, which is convenient for users to operate and maintain. Its shell design conforms to ergonomic principles, which is not only strong and durable, can effectively resist collisions and impacts in industrial environments, but also has good heat dissipation performance, ensuring that the equipment can maintain a stable working state under long-term high-load operation.
In terms of internal structure, it adopts an advanced hardware architecture and a high-performance microprocessor, laying a solid foundation for quickly and accurately processing various complex signals and control instructions. At the same time, the logic controller also integrates a series of high-quality components, such as high-precision signal acquisition circuits and stable and reliable power modules. These components work together to ensure the excellent performance and stability of the equipment.
II. Performance Parameters
(1) Electrical Characteristics
Power Requirements: TM251MESE is compatible with a 24V DC power supply and has a wide voltage tolerance range, which can work stably in the voltage range of 20.4V to 28.8V. This design enables it to adapt to the complex and changeable power supply conditions in different industrial sites, reducing the risk of equipment failure caused by voltage fluctuations. At the moment of startup, it can withstand a surge current of up to 50A, ensuring that the equipment can start smoothly when the power is turned on, without damaging the internal circuit due to excessive startup current. Moreover, when running at full load and connected to the maximum number of I/O expansion modules, its power consumption ranges from 32.6W to 40.4W. While efficiently completing control tasks, it minimizes energy consumption, helping enterprises achieve the goal of energy conservation and emission reduction.
Input and Output Specifications: Under the local I/O architecture, it supports connecting 7 I/O expansion modules; in the remote I/O architecture, the number of connectable I/O expansion modules is as many as 14. This strong expansion capability allows users to flexibly configure the number of input and output points according to actual production needs, meeting the diverse needs of industrial control systems of different scales. For example, in a large automated production line, a large number of digital inputs may be needed to collect status signals of various sensors, and many analog outputs may be used to accurately control the actions of actuators. The rich I/O expansion resources of TM251MESE can easily meet such complex needs.
Signal Processing Capability: Relying on advanced hardware architecture and high-performance microprocessors, TM251MESE can quickly collect various input signals and perform efficient analysis and conversion. For high-speed changing signals common in industrial production, such as motor speed feedback signals and production line material counting signals, it can respond in a very short time, accurately convert the collected analog signals into digital signals for subsequent processing by the control system. At the same time, it also has strong computing power, which can perform complex logical operations and data processing on these signals in real time, ensuring that the control system can quickly make accurate decisions based on the actual operating status of the equipment, thereby achieving precise control of the production process.
(2) Interface Characteristics
External Device Connection Interface: TM251MESE is equipped with a variety of external device connection interfaces to meet the access needs of different devices. Among them, the analog signal connection adopts a high-precision and anti-interference dedicated interface. For example, when connecting analog devices such as temperature sensors and pressure sensors, this interface can effectively reduce the attenuation and distortion of signals during transmission, ensuring that the collected analog signals can accurately reflect the actual operating parameters of the equipment. For digital signals, it is connected through a reliable photoelectric isolation interface. This interface design can effectively isolate external interference signals, ensuring stable transmission of digital signals even in complex electromagnetic environments, avoiding signal misjudgment caused by interference, and ensuring the accuracy of the control system in receiving and processing digital signals.
Communication Interface: In terms of communication functions, TM251MESE performs excellently. It has two different Ethernet network interfaces, namely Ethernet 1 and Ethernet 2, each with independent IP and MAC addresses. Ethernet 1 consists of two switched Ethernet ports, mainly used for communication between machines or with the control network. Through these two ports, TM251MESE can realize high-speed data interaction with other automation equipment, such as programmable logic controllers (PLCs) and industrial computers, building a stable and reliable control network. Ethernet 2 consists of one Ethernet port, specially used for device network connection and supporting industrial Ethernet connection. Using this port, various industrial Ethernet slave devices, such as Modbus TCP I/O scanners and Ethernet/IP scanners, can be easily connected to realize centralized monitoring and management of on-site equipment. In addition, it is equipped with a non-isolated serial link interface with an RJ45 connector, supporting RS-232/RS-485 communication protocols, which can be used to connect some traditional serial devices, such as intelligent instruments and frequency converters, greatly enhancing the product's compatibility and versatility. At the same time, it is also equipped with a USB Mini-B programming port, which is convenient for users to program and debug the equipment using EcoStruxure Machine Expert programming software, providing users with a convenient operating experience.
(3) Environmental Adaptability
Operating Temperature Range: The controller can operate stably under extremely harsh temperature conditions, with an operating temperature range of -25°C to +60°C. Whether in cold northern winter outdoor industrial sites, hot southern summer high-temperature workshops, or even some special high-temperature or low-temperature industrial environments, such as high-temperature areas in steel mills and low-temperature environments in cold storage, TM251MESE can always maintain good working performance, ensuring that industrial production is not affected by temperature changes, and providing reliable guarantee for the continuous production of enterprises.
Anti-Electromagnetic Interference Performance: In industrial production environments, there are often complex electromagnetic interference sources, such as the start-up of large motors and the operation of frequency converters, which may have a serious impact on the normal operation of equipment. To meet this challenge, TM251MESE adopts advanced electromagnetic shielding technology and filter circuits. Its shell is made of special electromagnetic shielding materials, which can effectively block the intrusion of external electromagnetic interference signals. At the same time, the high-performance filter circuit integrated in the internal circuit can perform real-time filtering processing on input and output signals, removing clutter and interference components in the signals, ensuring the normal operation of the internal circuit and the accuracy of signal transmission. After strict industrial-grade electromagnetic compatibility testing, the product fully complies with relevant standards and can work reliably in strong electromagnetic interference environments, providing strong support for the stable operation of industrial automation systems.
Humidity Adaptability: TM251MESE can adapt to a non-condensing humidity environment of 0% to 95%. In coastal areas with high humidity or humid industrial production environments, such as paper mills and printing and dyeing factories, electronic components inside the equipment are prone to short circuits or corrosion due to humidity, which affects the normal operation of the equipment. However, TM251MESE effectively avoids these problems through special moisture-proof design and the selection of electronic components with good moisture-proof performance. Even if it runs for a long time in a high-humidity environment, it can still work normally, without short circuits of internal circuits or damage to components due to humidity problems, ensuring the stable operation of the power system under different humidity conditions.
III. Functional Features
(1) Comprehensive Industrial Control Functions
Support for Multiple Control Tasks: TM251MESE has strong control capabilities and can handle multiple complex control tasks at the same time. It supports up to three cyclic main tasks, one freewheeling task, eight event tasks and four cyclic main tasks. This multi-task processing mechanism enables it to flexibly allocate computing resources according to different needs in the industrial production process and efficiently coordinate the operation of various equipment. For example, in an automated assembly line, it can simultaneously control the transportation of materials, the processing actions of equipment, the quality inspection of products and other links, ensuring the efficient and stable operation of the entire production line.
High-Speed Counting and Motion Control: For application scenarios requiring high-precision position control and speed control, such as CNC machine tools and automated assembly equipment, TM251MESE also performs well. It has a built-in high-speed counter, which can quickly and accurately count external pulse signals, thereby realizing accurate measurement of the movement position and speed of the equipment. At the same time, combined with its powerful motion control function, it can output precise pulse signals to control the speed and direction of the motor, realizing precise positioning and rapid movement of the equipment, and meeting the strict requirements for high-precision motion control in industrial production.
(2) Flexible Data Processing and Storage Functions
Data Processing Capability: A powerful data processing module is integrated inside, which can conduct real-time analysis and processing of various collected data. It can not only perform basic arithmetic operations and logical operations, but also support complex data transformation and processing algorithms. For example, in the industrial production process, it can perform statistical analysis on a large amount of real-time data collected by sensors, extract valuable information, such as equipment operating status and product quality parameters, to provide data support for production decisions. At the same time, it can also timely alarm and handle abnormal data according to preset rules and algorithms, ensuring the safe and stable operation of the production process.
Data Storage Function: It has large-capacity storage units, including 8MB of program memory and 64MB of system memory RAM, which can be used to store user-written control programs and a large amount of data generated during operation. In addition, it is equipped with an SD card slot, supporting SD cards with a maximum capacity of 32GB, which is convenient for users to back up data and expand storage. Through the SD card, users can store important information such as historical data and alarm records during equipment operation for a long time, facilitating subsequent data analysis and fault Investigation. At the same time, the SD card can also be used to quickly update the control program of the equipment, improving the maintenance efficiency of the equipment.
(3) Reliable Fault Diagnosis and Self-Protection Functions
Fault Diagnosis: To ensure the stable operation and timely maintenance of the equipment, TM251MESE has a built-in perfect fault diagnosis system. Through multiple sensors and monitoring circuits, it conducts all-round real-time monitoring of its own working status, including power supply voltage, signal transmission quality, chip temperature, I/O module status, etc. Once any abnormal situation is detected, the system will immediately send detailed fault alarm information to the user through the indicator lights and communication interfaces on the equipment. For example, when abnormal power supply voltage is detected, the PWR indicator will flash or change color, and at the same time, the power fault information will be sent to the monitoring system through the communication interface, prompting the user that there may be a power problem, helping operation and maintenance personnel quickly locate and solve the fault, and greatly shortening the equipment downtime.
Self-Protection: When a fault is detected, TM251MESE can quickly take corresponding self-protection measures to prevent the fault from expanding and protect the safety of itself and the entire industrial control system. For example, when a short-circuit fault occurs in an input channel, the equipment will automatically cut off the power supply of that channel to avoid damaging other circuit components due to excessive short-circuit current, and at the same time report the fault channel information to the control system for maintenance by operation and maintenance personnel. In addition, it also has overvoltage and overcurrent protection functions. When it detects that the power supply voltage is too high or the current is too large, it will immediately start the protection mechanism to cut off the power input and protect the equipment from damage.
(4) Good System Compatibility and Expandability
Compatibility: As an important member of the Modicon M251 series, TM251MESE has excellent compatibility with other industrial automation products of Schneider and third-party equipment. It can be seamlessly integrated into existing industrial automation control systems and work with other equipment to realize the overall function of the system. For example, it can perfectly cooperate with Schneider's touch screens, frequency converters, servo drives and other products, conduct data interaction through a unified communication protocol, and build an efficient and stable automation control system. At the same time, it also supports communication and connection with third-party intelligent equipment, such as intelligent instruments and sensors, providing users with more equipment choices and system integration schemes.
Expandability: With the continuous expansion of industrial production scale and the increasing complexity of production processes, higher requirements are put forward for the expansion capability of control systems. TM251MESE has fully considered this and has good expandability. Users can flexibly add or replace I/O expansion modules, communication modules, etc. according to actual needs to meet the system's expansion requirements for the number and types of input and output channels as well as communication functions. For example, when an enterprise needs to increase the number of detection points in the production line, it can conveniently add a digital input expansion module; when it needs to communicate with new equipment, it can be realized by replacing or adding corresponding communication modules. This flexible expansion capability provides great convenience for the upgrading and transformation of industrial automation systems and effectively protects users' early investment.
1YrAnshun, Guizhou, China
Business license
yezi
Hi there! Welcome to my shop. Let me know if you have any questions.