YWZ5-400/121 Explosion-proof Brake for Dust and Gas Industry Heng Yang Heavy Industry for Coal Mine and Chemical Factory

Removing the hydraulic brake? How do I do it?

　　The scope of use of hydraulic brakes and how to use them has been explained to you, but if you need to disassemble the brake because of special needs, can you disassemble it according to the correct steps? It doesn't matter if you can't, the following is to share with you about the steps to disassemble such as the brake.

　　Step 1: Remove the connecting bolts and copper washers.

　　Step 2: Disconnect the brake hose. Insert the open hose into the container and then carefully pump out the oil.

　　Step 3: Remove the locating bolt, caliper assembly, brake friction pad, friction pad spring and caliper bracket

　　Step 4: Remove the piston and piston sealing body.

　　Step 5: Blow compressed air into the opening of the hose fitting and push out the caliper piston from the caliper body. Do not pry on the piston, which should be covered with a rag to prevent injury when ejected from the cylinder.

　　Step 6: Remove the piston seal.

If you are not very familiar with the hydraulic brake removal steps, you can follow a few of these steps. If there is anything you don't understand about brakes, please call for more information!