German technical background VOK-607 Wax dispersion For solvent based can coatings and coil coatings replaces BYK-607

German technical background VOK?- AP 607 wax dispersion

The wax dispersion based on polytetrafluoroethylene modified polyethylene wax is used for solvent based can coatings and coil coatings. Increase surface hardness and smoothness.

Product Information

Chemical composition: PTFE modified polyethylene wax dispersion

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Non volatile matter (1h, 125 ℃): 35%

Carrier: diethylene glycol butyl ether acetate/butyl diethylene glycol/aromatic compound 1/1

Melting point (wax component): 115 ℃

Particle size distribution (laser diffraction, volume distribution): D50: 4 μ m D90: 10 μ m

Viscosity (23 ℃, D=800/s):<200 mPa · s

Storage and transportation

Sensitive to temperature. It must be stored and transported at a temperature lower than 35 ℃. Stir well before use.

application area 

Coating industry

Product features and advantages

The additive can improve the surface hardness and surface smoothness of solvent based can coatings and coil coatings. No adverse effect on gloss and leveling, no foam stabilizing effect.