Awd-5 Automatic Water Distiller 5L/H for Laboratory and Medical Treatment

AWD-5 Automatic Water Distiller For Laboratory and Medical Treatment

Installation Schematic

This product heats city water through electricity and makes pure water though distillation which can support department of medical treatment,health care,research, plating and laboratory. And if the quality of raw water is accorded with TJ20-76Drinking water hygiene standard, the distilled water's quality meets the National Pharmacopoeia Regulations.

5 liters/hour Single phase 220 volts 4. 5 kilowatts 10 liters/hour 20 liters/hour Three-phase 380 volts/Y7. 5 watts

Water source valve

1.backwater pipe      2.Condenser      3.water inlet control valve     4.Glass water table    5.Evaporation pot                            6.Drain valve       7.Distilled water outlet pipe             8.power cable

K-switch blade     S-fuse         P-ground version                  R-heater            6-shell must be properly grounded

Petroleum Products General Testers:

1.Fully Automatic Karl Fischer Water Content Tester TP-2100
2.Digital Karl Fischer Water Content Tester TP-6A
3.Kinematic Viscosity Tester VST-2000
4.Kinematic Viscosity Tester TPV-8
5.Kinematic Viscosity Tester VST-3000
6.Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7.Fully Automatic Surface/Interface Tension Tester IT-800
8.Automatic Surface/Interface Tension Tester (Platinum Plate Method) IT-800P
9.Fully Automatic Open Cup Flash Point Tester TPO-3000
10.Fully Automatic Closed Cup Flash Point Tester TPC-3000
11.Digital Open Cup Flash Point Tester TPO-100
12.Digital Closed Cup Flash Point Tester TPC-100
13.Cloud Point & Pour Point Tester PT-2000
14.Multi-functional Vibration Tester VBT-2000
15.Automatic Potentiometric Titrator TP668
16.Petroleum Products Density Tester DST-3000
17.Petroleum Products Density Tester TP-109A
18.Karl Fischer Volumetric Water Content Titrator TPD
19.Distillation Range Tester DIL-201
20.Online Oil Quality Tester PTT-002
21.Liquid Phase Corrosion Tester TPS-05
22.Copper Corrosion Tester TP-113
23.Petroleum And Synthetic Liquid Anti-Emulsification Tester TP-122
24.Dew Point Tester DPME-P
25.Portable Chilled Mirror Dew Point Tester TP-1500

Insulating Oil Testers:

1.Fully Automatic Insulating Oil Dielectric Strength Tester IIJ-II
2.Fully Automatic Insulating Oil Dielectric Strength Tester DYT
3.Fully Automatic Insulating Oil Dielectric Strength Tester DYT-2
4.Three Cups Insulating Oil Dielectric Strength Tester IIJ-III
5.Six Cups Insulating Oil Dielectric Strength Tester IJJ-VI

Lubricating Oil Tester

1.Anti-corrosive Oil/Grease Salt Spray Corrosion Tester TP-0081
2.Air Release Value Tester TP-0308
3.Foam Characteristics Tester FC-892
4.Lubricating Oil High Temperature Foam Characteristics Tester SD-0722
5.Dark Petroleum Products Sulfur Content Tester TPC-120
6.Petroleum Products Aniline Point Tester TP-262A
7.Petroleum Products Ash Content Teter TP-508
8.Petroleum Products Chroma Tester TP-225
9.Petroleum and Synthetic Liquid Anti-emulsification Tester TP-122
10.Automatic Petroleum Products Carbon Residue Tester(Micromethod)CS-0625
11.Lube Oil/Grease Evaporation Loss Tester EL-7325
12.Lubricating Abrasion Tester LWT-2

Pre-sale service:

Professional pre-sale model/configuration selection advise and technical support -- offered by experienced technician.

Free on-site installation, debugging and technical training -- offered by strictly trained technology application engineers.

We build instrument service profile for our clients to record the product service and maintenance conditions.

After-sale service:

The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.

We guarantee the maintenance time no more than 3 working days and response time within 1 hour.

After instruments start service, we will pay follow-ups to collect the service conditions.