Glass Tube PPR Pipe Extrusion Machine Plastics Extruder 75mm-160mm

PPR glass tube or pipe extrusion machine / production line(75mm-160mm) is used to produce?PPR glass tube or pipe pipe with 75mm - 160mm diameter.

PPR glass tube is three layer pipe,its feature:

1. Linear expansion coefficient is only about 20 to 30% of the normal pp-r products;Thoroughly solved the plastic pipe flexible problems.

2. The stiffness is stronger, no pipe droop,less fixed point.All of these feature reduce the engineering cost.

3. Proof pressure is higher,has a longer service life in the shaking force.

4. Better high temperature resistance,normal work temperature can reach 95-100℃

5. Under the same level of pressure,PPR - GRP - PPR has a thinner wall and larger pipe diameter,so there is larger water-carrying capacity.

6. Good sealing,no water moss,no oxygen permeability,so it could keep fresh pure water quality.

PPR glass tube pipe extrusion machine?extrusion machine / production line(75mm-160mm)?production:

PPR glass tube or pipe extrusion machine / production line(75mm-160mm)Introduction:

1.?Total?installed?power:?180Kw,?380?V?three?phases+N+G,?50HZ

Load?factor:?55%-80%??(Actual?power?is?140kw)

2.?Cooling?circulars?water:10 m3/h

3.?Compress?air:0.3m3/min

4.?Workhouse:?50000×2300×2600mm(length,?width?and?high?of?line)

5. Products dimension: 75mm-160mm

6. Output: 250kg/hour

PPR glass tube pipe extrusion machine?extrusion machine / production line ( 75mm-160mm)?machinery specification:

All the PPR glass pipe production line:

1.?Automatic?Feeder?and?drying?hopper

2. Single?Screw?Extruder 65 / 33 ( Middle layer of GRP ) 1set

? ?Single?Screw?Extruder 65 / 33 ( Inner and out layer of PPR ) 1set

3. Mark line extruder SJ 25 / 25

4.?PIPE?molds

5. Vacuum?sizing tank

6. Spray cooling tank

7. Printer

8. Belt?haul-off

9. Non?scrap?Cutting?unit

10. Stacker

11. Digital?control?cabinet

Technology?and?Service:

1. Seller?supply?full?set?of?technical?document,?cutter?and?other?full?document?(write?in?English).??

2. Seller?supply?training?for?buyer’s?staff?until?buyer?can?produce?the?eligible?production?independently.??

3. Seller?is?responsible?for?installing,?testing,?adjusting?and?debugging?the?machines?in?buyer’s?factory.

4. Buyer?should?pay?the?expense?for?our?engineers?including?for?our?engineer?including?round-

way?tickets,?inland?traffic,?lodging?and?boarding?fee?when?the?machine?is?installed,?tested?and?maintained.

5.?Seller?will?go?to?install?machines?after?the?machine?is?arrived?at?buyer?and?buyer?will?have?prepared?all?

conditions?(including?power,?water,?compress?air,?tools?and?materials?for?producing?pipe,?etc)?for?installing?

and?testing?these?machines.?Buyer?should?pay?60USD/day.

6. When?installing,people?of?both?sides?cooperate?well?and?carefully,buyer?supplies?convenient?working?

condition,any?problem,?should?discuss?peacefully?and?kindly.

7. Buyer?supply?proper?working?tools,?equipments?and?other?conditions.

8. The?expense?including?the?accommodation?and?materials?of?the?trial-

run?the?machine?for?testing?and?other?expenses(electric,?water,?air?and?worker)?will?be?on?seller’s?account,

?if?the?buyer?or?their?representatives?do?the?inspection?of?the?machines?before?shipment.

9. Guarantee?period:?14?months?after?shipment?(the?date?of?B/L)