PVC Laminated Profile Extrusion Machine For Door And Windows Frame

Door and windows frame pvc laminated profile extruder / production line

Door / windows frame pvc laminated profile production line is used to produce pvc / wpc door frame profile.

WPC profiles extrusion lines have almost the same specifications , just different moulds,also the extruder can be changed smaller.

WPC profiles has many specifications,just like the picture:

Door / windows frame pvc laminated profile production line?project?evaluation:

According?to?your?requirement,?we’d?like?to?recommend?our?SJZ65/132?PVC?Profile?Extrusion?Line.?

This?extrusion?line?is?co?mposed?of?SJZ65/132?Conical?Twin?screw?Extruder?and?downstream?assistant

?machine.?Please?check?the?below?information:

Material?characteristics

based?material?: PVC?powder,CaCo3.

Additive :?Coupling,Lubricant

Material?form : ?All?the?material?should?be?mixed?completely.?

Finished?product :?PVC?Profile;

Output?capacity :?150～200kg/hr?(depending?on?finished?product)

Basic?Infrastructure?( Provided?by?customer )

a.?Space?for?profile?extrusion?line?in?workshop:?

About?22m?(length)×2.5m(width)×3m(height)?(Adjustable?according?to?your?factory.?We?ask?you?to?show?us?

the?design?draw?of?your?workshop).

b.?Electricity?network:?380V/60Hz?(Adjustable?according?to?your?local?voltage?standard).

c.?Wire/cables:?wires/cables?from?customer’s?general?control?cabinet?to?the?main?control?cabinet?for?profile?

extrusion?line;?all?electrical?cable?from?the?main?control?cabinet?to?each?machine.?

d.?Water?supply:?main?water?pipeline?supply?and?water?pipes?to?machines.

e.?Means?for?lifting?the?machines?when?unloading?and?positioning.

f. ?Everything?else?not?clearly?mentioned?above.

Here is a list of the?Door / windows frame pvc laminated profile extruder / production line?equipment:

1, Automatic feeder

2, SJ65 / 132 conical twin screw extruder

3, Mould

4, Calibration platform

5, Haul - off

6, Cutter

7, Stacker ( tipping table )

?Spare part

?1, Mixer

?2, Printer

?3, Crusher

?4, Mill

?5, Drilling machine

?6, Hot stamping machine

?7, Embossing machine

?8, Staning machine

Technology?and?Service:

1. Seller?supply?full?set?of?technical?document,?cutter?and?other?full?document?(write?in?English).??

2. Seller?supply?training?for?buyer’s?staff?until?buyer?can?produce?the?eligible?production?independently.??

3. Seller?is?responsible?for?installing,?testing,?adjusting?and?debugging?the?machines?in?buyer’s?factory.

4. Buyer?should?pay?the?expense?for?our?engineers?including?for?our?engineer?including?round-

way?tickets,?inland?traffic,?lodging?and?boarding?fee?when?the?machine?is?installed,?tested?and?maintained.

5.?Seller?will?go?to?install?machines?after?the?machine?is?arrived?at?buyer?and?buyer?will?have?prepared?all?

conditions?(including?power,?water,?compress?air,?tools?and?materials?for?producing?pipe,?etc)?for?installing?

and?testing?these?machines.?Buyer?should?pay?60USD/day.

6. When?installing,people?of?both?sides?cooperate?well?and?carefully,buyer?supplies?convenient?working?

condition,any?problem,?should?discuss?peacefully?and?kindly.

7. Buyer?supply?proper?working?tools,?equipments?and?other?conditions.

8. The?expense?including?the?accommodation?and?materials?of?the?trial-

run?the?machine?for?testing?and?other?expenses(electric,?water,?air?and?worker)?will?be?on?seller’s?account,

?if?the?buyer?or?their?representatives?do?the?inspection?of?the?machines?before?shipment.

9. Guarantee?period:?14?months?after?shipment?(the?date?of?B/L)