Outdoor Decking Board WPC Profile Machine Wood Plastic Composite Machinery

Plastic and wood composite outdoor decking board profile extruder machine / production line

Plastic and wood composite outdoor decking board profile extruder machine /?production line?is one kind of WPC profiles extrusion line.

WPC profiles extrusion lines have almost the same specifications,just different moulds,also the extruder can be changed smaller.

WPC profiles has many specifications,just like the picture:

Plastic and wood composite outdoor decking board profile extruder machine / production line?project?evaluation:

??Always,the outdoor decking board is HDPE and wood ?plastic composite ,the ?indoor decking board is the PVC and wood composite.

For outdoor?WPC?decking?board profile?,?we’d?like?to?recommend?our?SJZ65/132?PE and Wood Profile?Extrusion?Machine?Line.?This?extrusion?line?is?composed?of?SJZ65/1132?Conical?Twin?

screw?Extruder?and?downstream?assistant?machine.?Please?check?the?below?information:

Material?characteristics:

Based?material?: HDPE 30%,Powder 60%,Chemical additives 10%

Additive :?Coupling,Lubricant

Material?form :?All?the?material?should?be?mixed?completely.?

Finished?product :?HDPE and wood profile;

Output?capacity :?150～200kg/hr?(depending?on?finished?product)

Basic?Infrastructure?(Provided?by?customer)

a.?Space?for?profile?extrusion?line?in?workshop:?

About?22m?(length)×2.5m(width)×3m(height)?(Adjustable?according?to?your?factory.?We?ask?you?to?show?us

?the?design?draw?of?your?workshop).

b.?Electricity?network:?380V/60Hz?(Adjustable?according?to?your?local?voltage?standard).

c.?Wire/cables:?wires/cables?from?customer’s?general?control?cabinet?to?the?main?control?cabinet?for?profile

?extrusion?line;?all?electrical?cable?from?the?main?control?cabinet?to?each?machine.?

d.?Water?supply:?main?water?pipeline?supply?and?water?pipes?to?machines.

e.?Means?for?lifting?the?machines?when?unloading?and?positioning.

f.?Everything?else?not?clearly?mentioned?above.

Here is a list of the?Plastic and wood composite outdoor decking board profile extruder machine / production line?equipment:

1, Automatic feeder

2, SJ65/132 conical twin screw extruder

3, Mould

4, Calibration platform

5, Haul-off

6, Cutter

7, Stacker(tipping table)

?Spare part

?1, Mixer

?2, Printer

?3, Crusher

?4, Mill

?5, Drilling machine

?6, Hot stamping machine

?7, Embossing machine

?8, Staning machine

Technology?and?Service:

1. Seller?supply?full?set?of?technical?document,?cutter?and?other?full?document?(write?in?English).??

2. Seller?supply?training?for?buyer’s?staff?until?buyer?can?produce?the?eligible?production?independently.??

3. Seller?is?responsible?for?installing,?testing,?adjusting?and?debugging?the?machines?in?buyer’s?factory.

4. Buyer?should?pay?the?expense?for?our?engineers?including?for?our?engineer?including?round-

way?tickets,?inland?traffic,?lodging?and?boarding?fee?when?the?machine?is?installed,?tested?and?maintained.

5.?Seller?will?go?to?install?machines?after?the?machine?is?arrived?at?buyer?and?buyer?will?have?prepared?all?

conditions?(including?power,?water,?compress?air,?tools?and?materials?for?producing?pipe,?etc)?for?installing?

and?testing?these?machines.?Buyer?should?pay?60USD/day.

6. When?installing,people?of?both?sides?cooperate?well?and?carefully,buyer?supplies?convenient?working?

condition,any?problem,?should?discuss?peacefully?and?kindly.

7. Buyer?supply?proper?working?tools,?equipments?and?other?conditions.

8. The?expense?including?the?accommodation?and?materials?of?the?trial-

run?the?machine?for?testing?and?other?expenses(electric,?water,?air?and?worker)?will?be?on?seller’s?account,

?if?the?buyer?or?their?representatives?do?the?inspection?of?the?machines?before?shipment.

9. Guarantee?period:?14?months?after?shipment?(the?date?of?B/L)