Copper Thermostat, Bakelite and Ceramic Available

Copper Thermostat, Bakelite and Ceramic Available

Characteristic

KSD301 Series thermostat is a temperature-sensing parts which has double metal. When normally working, it has stable and accurate performance. Also, it specialize in  small size, high accurate rate, long service life and small affection to Radio Interference.
Note

1)    In order to maintain good temperature-sensing, please make sure the metal panel connects the parts needs testing when installing thermostat.

2)    Press the temperature sensing surface by heat conduction silicone grease or similar heat conduction

3)    Do not press the cover top to avoid loose or deformation during installation.  

4)    Make sure thermostat inside away from liquid. Do not press thermostat to avoid crash. Do not change the shape of terminal which affects electrical reliability. Make sure insulation protection measures are maintained to keep safty.

5)    Do not connect thermostat with current higher  than 5A. Please choose conducting wire whose copper core section’s between 0.5 to 1mm²
0.75~1.5mm².  When connected with current lower than 10A, please choose conducting wire whose copper core section’s between 0.75 to 1.5mm²

6)    Make sure the ambient humidity lower than 90℅.  Please keep thermostat in warehouse who’s under 40℃, has clean, dry and corruption-free air.
Copper Thermostat Specification

1)    Rated voltage and current:AC125V,15A      AC250V,10A,AC250V,16A

2)    Operating rage:-30~+260℃

3)    Temperature range:10~25℃. According to demand

4)    Temperature tolerance:±5/±10℃ or according to demand

5)    Ambient temperature:Common:T150℃;High temperature:T260℃;

6)    Connecting way:Terminal 250#(Bending 0~90℃ available);Terminal 187#(Bending 0~90℃ are available,thickness 0.5/0.8mm are available);

7)    Service life:≥10,0000Times

8)    Electrical Strength:1500VAC/0.5mA/1min voltage-withstanding test without flashing  or  breakdown

9)    Connecting resistance:≤50mΩ  Initial rate

10) Insulation resistance:≥100MΩ(DC500V common)

11) Connecting way:Normally closed:When temperature goes up,electricity is cut off.  When temperature goes down, electricity is connected

12)  Shell protecting rate:IP00

13) Grounding mode: Connecting the appliance grounding parts through the metal shell

14) Installing way:KSD301 series install comment moving ring. Install small moving ring, install panel moving ring, install common big aluminum cover with holes, install long aluminum cover

15) Heat-resistance rate: Installation service temperature no higher then operating temperature by 20%

16) Insulation material PII rate:PII175;

17) Function:Inside plated.

18) Insulation shell:Bakelite,ceramic,PPS