YIMEI QJB Series Submersible Mixer

Specifications

 Submersible Mixer

 1.Description

1, submersible mixer can meet the technological requirement for homogeneity and fluidity of solid-liquid two-phase flow and solid-liquid-gas three phase flow in biochemical course of the water

treatment process. It is composed of the submersible motor, impeller, and installation system etc.. The submersible mixer is in direct connection structure. Comparing with the traditional high-power electric motor that retards speed.

2,submersible mixer is supporting by the conventional four-motor and highefficiency reducer, compared to Multi-motor can significantly reduce the power of burden, can be saving energy more than 15%.

3,The submersible mixers are mainly used for mixing, agitating and making ring flows in the process of municipal and industrial sewage treatment and can also be used for equipment maintenance of the landscape water circulation through agitation, they can achieve the function of creating water flow, improving water quality, increasing oxygen content in the water and effectively preventing the sedimentation of the suspended substances.

2.Feature:

 1.compact structure,small volume,light weight, easy operation maintenance,fast installation,long service life etc.

2.the blade has the self-cleaning function, can prevent sundries wind,blocking

3.can combine with aeration system to make energy reduced greatly, greatly increase oxygen volume, effective prevent sediment.

4.motor winding is F grade insulation, protection grade is IP68

5.all fastener is stainless steel.

3.Specification Introduction:

QJB0.85/8-260/3-740s
QJB------ submersible mixer
260----- impeller dia 
740------- impeller rotate speed(r/min)
0.85------ motor power(KW)S--------stainless steel
matching power range:0.85-10KW  impeller dia range:260-615mm 

 Impeller rotate range:180-980r/min

4.Installation system:

The special install system of mixer can be fast installation and dismantle submersible mixer no need discharge out the sewage in tank.

When tank depth H <4m, suggest adopt install system Ⅰ-1. The diving depth 

Can make adjustment in vertical direction according to requirement, and it can rotating maxi angle plus or minus 60° around guide pad is  in horizontal direction inner hoist system base,supporting bracket and below bracket and all concerned connect face all adopt expansion bolt fix, no need reserved hole.

Installation system Ⅱ using guide rope instead of guide pad, it has the feature of convenient installation, simple site installation etc, and effective improve too much depth tank condition, due to guide pad installation error and lead to can’t normal hoist condition.

Installation diagram of Submersible Mixer

submersible mixer drawing