Manufacturer Supply UV Curable Coatings for Bamboo and Wood Floor

Product Name

Product Number

Uses

Regular Transparent Putty

JN UV-7010

Used for deepfilling in floors, etc., and the veins and grains of the sbustrate can still be seen clearly after the substrate is applied with putty

Hard Transparent Putty

JN UV-7011

Used in materials with dark brown eye-like wood scars, and the film it forms is hard.

Transparent Jelly Putty

JN UV-7012

Used after deep color waterborne primer is applied to the substrates  and it improves the clarity of board

Product Name

Product Number

Uses

Oil Sealer

JN UV-7020

Used as sealer primer in boards made from teak, Keruing wood, etc.

Transparent Primer

JN UV-7021

Used to improve clarity and adhesion

Adhesive Primer

JN UV-7022

Used to improve adhesion

Adhesive Primer for Dark Color Board

JN UV-7023

Used after dark color seal coating as the first primer to enhance adhesion between two layers of coats

Elastic Primer

JN UV-7024

Used to improve the toughness and adhesion of films

Sanding Primer

JN UV-7025

Medium impregnating capacity, high transparency and excellent sanding property

Sanding Primer

JN UV-7026

Great impregnating capacity, high transparency and excellent sanding property

Hard Diamond Primer

JN UV-7027

Used to improve the hardness and abrasion resistance of film

Abrasion Resistant Diamond Primer

JN UV-7028

Used together with scratch and abrasion resistant Top Coat

Primer for Roll Coating before Curtain Coating

JN UV-7029

Used for roll coating, dying and sealing before curtain coating

Color Primer

JN UV-7030

Used for color repair in primer, with a maximum percentage of 20% for metal complex dyes

Curtain Coating Primer

JN UV-7031

Completely transparent and with great toughness

Adhesion

≤ Grade 1

Sanding Property

Good

Impregnating Capacity

Good

workability

Good

Transparency

Good

Abrasion Loss Value

(0.04-0.08) g / 100r 750g The film has not been abraded completely.

Hardness (as per Zhonghua Pencil)

2H-5H

Adhesion

≤ Grade 1

Water Resistance (Room Temperature)

No change after 96 hours

ChemicalResistance

No change after 48 hours

Weather Resistance

No change after temperature difference tests (from -30^oC to +60^oC) for 6 times

Resistance to Cigarette Burns

No black spot, crack or blister

Impact Resistance

≤ 9mm

Facility

Type of Coating

Amount of Coating 

Degree of Dryness

Note

Roll Coater

Waterborne Primer

15

100% dried

Applicable to oil-borne materials/substrates

Roll Coater

Oil Sealer

20

100% dried

Applicable to oil-borne materials and redsandalwood, etc.

Putty Machine

Transparent Putty

20

50% dried or 30% dried

Applicable to porous wood

Roll Coater

Regular Primer

20

50% dried

Used in impregnating and leveling of base materials (number of coatings shall be determined by the Manufacturer)

Sanding Primer

25

50% dried

Adhesive Primer

20

50% dried

Roll Coater

Diamond Abrasion Resistant Primer

30

30% dried

Improve scratch and abrasion resistance

Hard Primer

30

50% dried

Roll Coater

Sanding Primer

20

50% dried

Number amount of coatings shall be determined by the Manufacturer. Apply top coating after sanding gloss adjustment.

Sanding Primer

15

70% dried

Roll Coater

Scratch and Abrasion Resistant Top Coat

8

50% dried

2 UV lamps

Scratch and Abrasion Resistant Top Coat

7

100% dried

3 UV lamps, 5.6KW/lamp, 13m/min

Curtain Coater

Top Coat for Curtain Coater

90-110

100% dried