Hengyang Heavy Industry YPZ2|-500/80 Power Hydraulic Arm Disc Brake With Sensitive Action

Operating conditions.

Ambient temperature -20℃~+50℃.

The relative humidity of air is not more than 90%.

Generally used for three-phase AC power supply 50Hz,380V (according to the need can also produce 60Hz or different voltage, please specify when ordering); altitude in line with GB755-2000 standard. When it is lower than -20℃, the working fluid of the pusher is changed to YH-10 aviation hydraulic oil or with heater as required. For details, please refer to Ed pusher samples.

Outdoor rain and snow erosion or corrosive gases and media should be anti-corrosion type products.

YPZ2 power hydraulic arm disc brake brake is an essential part of stage machinery, whether it is vertical lifting equipment or horizontal walking equipment or even rotating equipment need braking device. It is both a control device and a safety device at the same time. The essence of the work of the brake is to produce braking effect through the friction of the friction vice.

YPZ2 electric hydraulic arm disc brake is an essential part of the stage machinery, whether it is vertical lifting equipment or horizontal walking equipment or even rotating equipment need braking device. It is both a control device and a safety device at the same time. The essence of the work of the brake is to produce braking effect through the friction of the friction vice. According to the work needs, or the kinetic energy of movement is converted into friction heat energy consumption, so that the mechanism stops movement; or through static friction to balance the external force, so that the mechanism to maintain the original static state. ypz2 power hydraulic arm disc brake

Commonly used brakes are divided into block, belt and disc brakes according to their structural form; classified into normally closed and normally open two types according to the working state; divided into electromagnetic brake, hydraulic electromagnetic brake and hydraulic actuator brake according to the manipulation system.

YPZ3 series electric hydraulic arm disc brake: 

YPZ3-315I/23; YPZ3-315I/30; YPZ3-315I/50; YPZ3-315I/80; YPZ3-355I/23; YPZ3-355I/30; YPZ3-355I/50; YPZ3-355I/80; YPZ3-400I/30; YPZ3-400I/50; YPZ3-400I/80; YPZ3-450I/50; YPZ3-450I/80; YPZ3-450II/50; YPZ3-450II/80; YPZ3-450II/121; YPZ3-450II/201; YPZ3-500II/50; YPZ3-500II/80; YPZ3-500II/ 121; YPZ3-500Ⅱ/201; YPZ3-560Ⅱ/50; YPZ3-560Ⅱ/80; YPZ3-560Ⅱ/121; YPZ3-560Ⅱ/201; YPZ3-630Ⅱ/80; YPZ3-630Ⅱ/121; YPZ3-630Ⅱ/201; YPZ3-710Ⅱ/121; YPZ3-710Ⅱ/201; YPZ3-630Ⅲ/201; YPZ3-630Ⅲ/301; YPZ3-710Ⅲ/201; YPZ3-710Ⅲ/301; YPZ3-800Ⅲ/201; YPZ3-800Ⅲ/301; YPZ3-900Ⅲ/201; YPZ3-900Ⅲ/301; YPZ3 YPZ3-1000Ⅲ/201; YPZ3-1000Ⅲ/301; YPZ3-1250Ⅲ/201; YPZ3-1250Ⅲ/301 The block brake is composed of two brake arms and two brake tiles located on both sides of the brake wheel, and it relies on the friction torque generated by the brake tiles pressing against the brake wheel to realise braking.