Mitsubishi AJ65SBTB1-16T transistor leakage output module

Mitsubishi AJ65SBTB1-16T transistor leakage output module

AJ65SBTB1-16T is a Mitsubishi CC-LINK module. AJ65SBTB1-16T parameter description: 16 point transistor leakage output module, DC12/24V0.5A/1 point, 1.5ms response time, 16 point 1 common terminal, 1-wire type, terminal block connection.

AJ65SBTB1-16T product specifications detailed description:

Output points: 16 points

Insulation method: optocoupler insulation

Rated load voltage: DC12/24V

Load voltage range: DC10.2~26.4V (fluctuation rate within 5%)

Load current: 0.5A/1 point, 3.6A/1 common terminal

Inrush current: below 1.0A 10ms

Leakage current at OFF: below 0.25mA

Voltage drop during ON: below 0.3V (TYP) 0.5A below 0.6V (MAX) 0.5A

Output form: leakage type

Protection functions: overload, overvoltage, and overheating protection functions

Response time:

OFF ->ON: below 0.5ms

ON ->OFF: below 1.5ms (resistive load)

External power supply for the output part:

Voltage: DC10.2~26.4V (fluctuation rate within 5%)

Current: 30mA (TYP.DC24V/1 common terminal), excluding external load current

Overcurrent suppressor: Zener diode

Common terminal method: 16 point 1 common terminal (terminal strip type, 1-wire type)

Number of occupied stations: 1 station allocated with 32 points (using 16 points)

I/O module power supply:

Voltage: DC20.4~26.4V (fluctuation rate within 5%)

Current: below 50mA (DC24V, when all points are ON)

Noise intensity: simulated noise 1500VP-P, noise width 1 μ s. The noise generated by a noise simulator with a noise frequency of 25-60Hz

Withstand voltage: DC external terminal summary - grounding AC500V for 1 minute period

Insulation resistance: DC external terminal summary - between grounding DC500V insulation resistance meter measurement above 1OM Ω

Protection level: IP2X

External connection method:

Communication part, I/O module power supply part:

7-point 2-segment terminal block [transmission circuit, I/O module power supply, FG]

The tightening torque of M3 * 5.2 is 59~88N · cm, and the number of inserts suitable for pressing terminals is within 2

Input/output power supply section, input/output section:

18 point direct installation terminal block [input/output power supply, I/O signal]

The tightening torque of M3 * 5.2 is 59~88N · cm, and the number of inserts suitable for pressing terminals is within 2

Module installation bolts:

Round M4 bolt with flat washer (tightening torque range 79~108N · cm)

Can be installed through DIN rails and can be installed in 6 directions

Applicable DIN rails: TH35-7.5Fe, TH35-7.5A1 (based on JIS C 2812 standard)

Suitable for crimping terminals:

1. RAV1.25-3 (based on JIS C 2805 standard) [Applicable wire size: 0.3~1.25mm2]

2. V2-MS3 (Japanese crimping terminal manufacturing company), RAP2-3SL (Japanese terminal company), TGV2-3N (Nichifu) [Applicable wire size: 1 25~2.0mm2]

Weight: 0.18kg

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.