Mitsubishi AJ65SBTB32-16DR input/relay output module

Mitsubishi AJ65SBTB32-16DR input/relay output module

AJ65SBTB32-16DR parameter description: DC input 8 DC24V 7mA; The response time is 1.5ms at 8:01, and the common positive/negative terminal shares a 3-wire type; Contact output 8 points DC24V/AC240V 2A/1 point, 4A/1 common terminal, response time of 12ms 4A/1 common terminal 2-wire type, terminal block connection, occupying 1 bureau.

Mitsubishi cc link module AJ65SBTB32-16DR product detailed specifications

[Enter specifications]

Input form: shared positive/negative common terminal

Input points: 8 points

Rated input voltage: DC24V

Rated input current: approximately 7mA

Simultaneously input the number of points:***

ON voltage/ON current: above 14V/3.5mA

OFF voltage/OFF current: below 6V/1.7mA

Input resistance: approximately 3.3k Ω

Voltage range: DC19.2-26.4V (fluctuation rate within 5%)

Response time: below 1.5ms (at DC24V)

Insulation method: optocoupler insulation

[AJ65SBTB32-16DR output specifications]

Output points: 8 points

Rated load voltage: DC24V 2A/1 point, AC240V 2A (cos φ＝ 1) /1 point, 4A/1 common terminal

Simultaneous ON points: all points

Small opening and closing load: DC5V 1mA

Opening and closing voltage: AC264V DC125V

Service life: mechanical over 20 million cycles, electrical over 100000 cycles

Opening and closing frequency: 3600 times/hour

Response time: OFF ->ON for less than 10ms, ON ->OFF for less than 12ms

. Fuse: None

Common terminal method: 4-point 1-common terminal (terminal block 2-wire type)

Insulation method: relay insulation

[Protection level] IP1X

[Module Power Supply]

Voltage: DC20.4~26.4V (fluctuation rate within 5%)

Current: below 85mA (DC24V, all points ON)

[External connection method]

Communication part, I/O module power part: 7-point 2-segment terminal block (M3 screw)

Input and output power supply section, input and output section: 34 point direct installation terminal block (M3 screw)

[External dimensions H * W * D] 50 * 179 * 40

[Weight] 0.28kg

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.