Mitsubishi Q-series PLC basic mode Q00JCPU

Mitsubishi Q-series PLC basic mode Q00JCPU

Q00JCPU program capacity: 8k steps I/O points: 256 power supply, integrated CPU on the substrate

Mitsubishi Q00JCPU, Q00CPU, and Q01CPU belong to the basic type of QCPU. Q00JCPU is a CPU module with a power module, and its main substrate and CPU module are integrated, so there is no need for a power module and main substrate.

Detailed Specification for Mitsubishi PLC CPU Q00JCPU Product

【 Control Method 】 Sequential Control Program Control Method

[I/O control mode] Refresh mode (when directly accessing I/O (DX □, DY □) through * * *, I/O can be directly accessed)

Program Language

◆ Sequential Control Language: Relay Symbolic Language, Logic Symbolic Language, SEELSAP3 (SFC), MELSAP-L, Function Block and Structured Text (ST)

Processing speed (sequence control program instructions)

◆ LD X0： 200ns

◆ MOV D0 D1 700ns

[Tracking Execution Time (Extended Scan Time)] None

[Constant scanning (function used to maintain normal scanning time)] 1 to 2000ms (can be set in lms)

【 Program capacity 】 8K steps

Memory capacity

◆ Program memory: 58K

Standard ROM: 58K

◆ CPU shared memory: none

【 Substrate expansion level 】 Level 2

[Number of installed modules] 16

【 Number of files stored 】 Program memory/standard ROM: 6 (parameters, intelligent function module parameters, sequence control program, SFC program, software component annotations, and initial values of software components can be stored as one file each)

[Number of allowed writes in standard ROM] 100000 times

2048 points (X/Y0 to 7FF)

[I/O points] 256 points (X/Y0 to FF)

[Direct Link Soft Components] Used to directly access the soft components of the link, * * * used for MELSECNET/H

Intelligent Function Module Software Component: A software component used to directly access the buffer memory of the intelligent function module.

[Latching Range] L0 to 2047 (default) (The locking range can be set for B, F, V, T, ST, C, D, and W.

【 RUN/PAUSE contact 】 A contact can be set in X0 to 7FF for each of RUN and PAUSE.

The allowable instantaneous power failure time varies depending on the type of power module, with a duration of 20ms or less. Varies depending on the type of power module.

【 DC5V internal current consumption 】 0.26A

Boundary dimensions H * W * D [mm] 98 * 245 * 98

Weight 0.66

Q00JCPU power supply specifications

Input power supply: AC 85-264V

Input frequency: 50/60Hz ± 5%

Input voltage distortion factor: within 5%

Input apparent power: 105VA

Impact current: 40A within 8ms

Rated output current of DC5V: 3A

◆ DC5V overcurrent protection: 3.3A or higher

◆ DC5V overvoltage protection: 5.5~6.5V

Efficiency: 65% or higher

Allowable time for instantaneous power failure: within 20ms (100VAC or higher)

◆ Operation indication: LED indication (POWER LED in CPU part: normal: ON (green), error: OFF)

◆ Fuse: built-in (cannot be changed by the user)

◆ Contact output column: None

Terminal screw size: M3.5 * 7

Available wire diameters: 0.75 to 2mm square

Available crimping terminals: RAV1.25 to 3.5, RAV2 to 3.5

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.