Mitsubishi 2-axis positioning module QD75D2N

Mitsubishi 2-axis positioning module QD75D2N

Mitsubishi QD75D2N parameter description:

2-axis, differential output, control units (millimeters, inches, degrees, pulses), positioning data of 600 data/axis, output pulse of 1Mpps, 40 pin connector

QD75D2N is a 2-axis differential output type positioning module of the Mitsubishi Q series. QD75D2N can replace QD75D2, and their functions are the same, and the program does not need to be changed.

Detailed specifications of Mitsubishi PLC positioning module QD75D2N:

Output type: Differential drive device output system

【 Number of control axes 】 2 axes

【 Interpolation function 】 2-axis linear interpolation and 2-axis circular interpolation

【 Control System 】 PTP (Point to Point) Control, Path Control (Linear and Arc can be set), Speed Control, Speed Position Switching Control, Position Speed Switching Control

【 Control units 】 Millimeters, inches, degrees, pulses

【 Positioning Data 】 600 pieces of data (positioning data numbers 1-600)/axis (can be set using peripheral devices or sequence control programs)

[Backup] Parameters, positioning data, and block start data can be saved on the flash ROM (without battery backup)

QD75D2N positioning function

1. Positioning system

·PTP (Point to Point) Control: Incremental System/System

·Path control: incremental system

·Speed Position Switching Control: Incremental System/System (Note 2)

·Position speed switching control: incremental system/system

2. Positioning range

① System:

· -214748364.8~214748364.7( μ m)

·-21474.83648~21474.83647 (inches)

·0-359.99999 degrees

·-2147483648~2147483647 (pulse)

② Incremental system:

· -214748364.8~214748364.7( μ m)

·-21474.83648~21474.83647 (inches)

·-21474.83648~21474.83647 (degrees)

·-2147483648~2147483647 (pulse)

③ Speed position switching control (INC mode)/Position speed switching control method:

· 0~214748364.7( μ m)

·0-21474.83647 (inches)

·0-21474.83647 (degrees)

·0-2147483647 (pulse)

④ Speed position switching control (ABS mode)

·0-359.99999 degrees

3. Positioning instruction speed:

0.01~2000000.00 (mm/min)

0.001~200000.000 (inches/minute)

0.001~200000.0000 (degrees per minute)

1-4000000 (pulses/second)

4. Acceleration/deceleration processing: automatic trapezoidal acceleration/deceleration, S-shaped acceleration/deceleration

5. Acceleration/deceleration time: 1-8388608 (ms) can be set in four forms for each acceleration and deceleration time.

6. Sudden stop deceleration time: 1~8388608 (ms)

Starting time

1- Axial control: 1.5 (ms)

1-axis speed control: 1.5 (ms)

2-axis interpolation control (synthetic speed): 1.5 (ms)

2-axis interpolation control (reference axis speed): 1.5 (ms)

2-axis circular interpolation control: 7 (ms)

2-axis speed control: 2 (ms)

The factors affecting the extension of starting time are added to the starting time under the following conditions:

·Select S-shaped accelerated alkali rate: 0.1 (ms)

·Other axes in operation: 0.5 (ms)

·Continuous positioning control period: 0.3 (ms)

·Continuous path control period: 0.3 (ms)

【 External wiring connection system 】 40 pin connector, differential driver common terminal

[Applicable wire diameter] 0.3 square millimetre (for A6CON1), AWG # 24 (for A6CON2)

[Applicable connectors for external devices] A6CON1, A6CON2, and A6CON4 are sold separately

Output pulse: 1Mpps

Connection distance between servo devices: 10m

【 Internal current consumption (5VDC) 】 0.45A

[Flash ROM write count] 100000 times

[Number of I/O points occupied] 32 points (I/O allocation: 32 points for intelligent function modules)

【 QD75D2N Boundary Dimensions (millimeters) 】 98 (H) * 27.4 (W) * 90 (D)

QD75D2N Weight (kg) 0.15

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.