German technical background VOK-2010 Wetting dispersant Reduce the viscosity of abrasive replaces BYK-2010

German technical background VOK ?- Disper 2010 Wetting Dispersant

VOK ?- Disper 2010 is a solvent free wetting and dispersing agent for water-based paint systems to produce a particularly economical resin free pigment concentrate.

Product Information

Chemical composition

Modified styrene maleic acid copolymer solution

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Amine value: 20 mg KOH/g

Density (20 ° C): 1.07 g/ml

Non volatile matter (10 minutes, 150 ° C): 40%

Acid value: 20 mg KOH/g

Carrier: water

Storage and transportation

Sensitive to temperature. Must be stored and transported between 5-40 ° C. The product may be stratified or turbid. Stir well before use.

Special attention

The additive is lotion.

Application field

Coating industry

Product features and advantages VOK ?- Disper 2010 strongly reduces the viscosity of the abrasive. It prevents the pigment from thickening by steric hindrance and electrostatic repulsion. As the pigment is deflocculated, it can improve color strength, transparency or hiding power, and obtain high luster. In addition, the auxiliary is also helpful for convection leveling. VOK ?- Disper 2010 has a relatively hydrophobic structure, which can reduce the influence of additives on the water resistance of dry film.

Recommended use

Industrial coatings

Automotive Coatings

Wood and furniture coatings

Anticorrosive coating

VOK ?- Disper 2010 is especially recommended for the production of stable resin free pigment concentrate slurry to prevent floating color of water-based paint. Pigment dispersion can only be carried out in water (without resin, amine or cosolvent). VOK ?- Disper 2010 contains no organic solvents and is only applicable to water-based systems.

Recommended dosage

Additive dosage (purchase form) is based on pigment:

Inorganic pigment: 20-30%

Titanium dioxide: 10-12%

Organic pigment: 30-75%

Carbon black: 130-150%

The above recommended dosage is for reference only, and good dosage shall be determined through a series of tests.

Adding method and processing guidance

In order to produce resin free pigment concentrate slurry, it is only necessary to mix the additives with water, and the pigments can be added only after the additives are evenly dispersed. Pigment dispersion can only be carried out in water (without resin, amine or cosolvent).