Semiautomatic 1 3 Gallon 3L 5L 6L Plastic Pet Bottle Blow Molding Machinery Blowing Machine Low Price

0.5-5L(2 cavity)

6L-10L(1 cavity)

Washing Part:

The bottle enters into the rinsing part of three-in-one machine through wide conveyor belt.

The grippers take the bottles from the inlet star-wheel while they are still driven by the star-wheel, thus guaranteeing a safe grip. 
After the gripping, the bottle is turned upside down with 180 degree and cantred above a spraying nozzle which directs a stream of rinse water into the bottle. After the draining period the bottle is turned over to an upright position again

Filling valve:

 Long tube filling type with 2 times filling process to make sure perfect filling level 

Liquid tank, filling valves, controlling rings, upgrading cylinder.
High speed and mass flow filling valve ensures the high filling speed and exact fluid level. Parts contacting liquid are all made of excellent stainless steel or food grade engineering plastic. 

Capping Part: 

Rotative capping turret, suitable to the application of screw plastic caps on PET bottles 
The fixed part consists of the cap hopper, the cap feeder with relevant motor and the cam actuating the capping heads. 
The heads are raised and lowered by the action of a follower that is riding on a shaped cam.

Flat Conveyor

 Energy saving. High efficient. Adapt to customer factory layout
Special lubrication system, keep products clean, health, safety
 Extended service life
Electric eyes design keep whole line running safety and quickly
Overload protection mechanism to effectively ensure the safety of the machine