HONEYWELL 51305072-200 CLCN-A

Brand: HONEYWELL

Type:51305072-200 CLCN-A

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Module of PLC, DCS, ESD system card, the card is a vibration monitoring system, steam turbine control system module, the advantages of the gas generator spare parts brand: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts of our products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.

CONTACT INPUT OPTIONS (Not Used) Casc Setpt Raise Generator Breaker Casc Setpt Lower Utility Tie Breaker Casc Control Enable Overspeed Test Remote Casc Setpt Enable External Run Aux Setpt Raise Start Permissive Aux Setpt Lower Idle / Rated Aux Control Enable Halt / Continue Auto Start Sequence Remote Aux Setpt Enable Override MPU Fault HP Valve Limiter Open Select On-Line Dynamics HP Valve Limiter Close Local / Remote LP Valve Limiter Open Remote Speed Setpt Enable LP Valve Limiter Close Sync Enable Extr/Adm Demand Raise Freq Control Arm/Disarm Extr/Adm Demand Lower Extr/Adm Setpt Raise External Trip 2 Extr/Adm Setpt Lower External Trip 3 Extr/Adm Control Enable External Trip 4 Remote Extr/Adm Setpt Enable External Trip 5 Select Extr/Adm Priority Controlled Shutdown (Manual) Contact Inputs # 2 through # 12 are entered following the same rules as described for Contact Input # 1. Function Keys Block When this header appears in the display, press the down arrow key to configure this block or press a left or right arrow key to select another block to configure. Each function key option may be configured only once. In addition, the function that the function key uses must be programmed or an error message will occur. For example, to use the Cascade Control Enable function key, the ‘Use Cascade’ function must be programmed. F3 KEY PERFORMS (must choose from list) Scroll through the option list by using the Adjust Up/Down Arrows or by selecting the NO key until the option desired appears, then press the YES or ENTER keys to select the option/function. OPTIONS FOR FUNCTION KEYS F3 & F4 (Not Used) Remote Extr/Adm Setpt Enable Local / Remote Select Extr/Adm Priority Idle / Rated Casc Control Enable Halt / Continue Auto Start Sequence Remote Casc Setpt Enable Remote Speed Setpt Enable Aux Control Enable Sync Enable Remote Aux Setpt Enable Freq Arm / Disarm Energize Relay Output Extr/Adm Control Enable BLINK F3 LED WHEN NOT ACTIVE ? dflt= NO (Yes/No) Select YES followed by ENTER to blink the function key’s LED when the function is not active but is enabled. The LED will be ON whenever the function is active. If NO, the function key LED is ON when the function is enabled, active, or in control. F4 KEY PERFORMS (must choose from list) Scroll through the option list by using the Adjust Up/Down Arrows or by selecting the NO key until the option desired appears, then press the YES or ENTER keys to select the option/function.