Best carbonizing Environment Friendly Quality No Smoke Bamboo Branches Wood Log Carbonization Kiln For Charcoal

Best carbonizing Environment Friendly Quality No Smoke Bamboo Branches Wood Log Carbonization Kiln For Charcoal

Wood log carbonization kiln for charcoal Is an airflow carbonization stove,whhich used for carbonizing wood ,sawdust briquette,coal, bamboo,coconut shell into charcoal.

Best carbonizing Environment Friendly Quality No Smoke Bamboo Branches Wood Log Carbonization Kiln For Charcoal Advantage :

1.Not only it has best carbonization effect and shortest carbonization time,

2.It can collect wood tar oil and exhaust gas.

3.After processed, this gas can used recycling fuel.

4.Also it is no any open fire, totally dry distillation

5.The carbonization temperature can be controlled and adjusted,highest temperature can reach 800-1000 °C

Application about Best carbonizing Environment Friendly Quality No Smoke Bamboo Branches Wood Log Carbonization Kiln For Charcoal

1.For bbq or burning for warm;
2.Use our charcoal mixer get charcoal powder  then use our different charcoal machine to get different charcoal shapes then bbq or burning for warm. 1.For bbq or burning for warm;

*Using our charcoal press ball machine to make charcoal balls 

*Using charcoal powder extruder to make charcoal briquettes

*Using our hydraulic tablet press to make shisha charcoal 

Working Principle about Best carbonizing Environment Friendly Quality No Smoke Bamboo Branches Wood Log Carbonization Kiln For Charcoal
1.HeatHow to produce charcoal? It is divided into three processes:

After sealing, heat the furnace with wood chips or gas. First, use a 10-minute fire to burn. When the temperature reaches 90 degrees Celsius, switch to a slow fire. This process takes 80-120 minutes to reduce water vapor in the material.

2. Pyrolysis
Continuous heating, when the temperature reaches 180-235 degrees Celsius for 3-5 hours, gas will be generated in the process. This gas is then used as fuel for heating. The whole process takes about 8 hours. When the temperature reaches the maximum and decreases, the carbonization process will end.

3. Heat dissipation
Hang the inner pot on the outside and seal the tube of the lid. Let it cool naturally. The cooling time is longer and the charcoal quality is good. When the temperature is below 50 degrees, you can remove the charcoal. Otherwise, when oxygen in the air comes into contact, the charcoal will burn again.

Structure about Best carbonizing Environment Friendly Quality No Smoke Bamboo Branches Wood Log Carbonization Kiln For Charcoal

includes heating room (for heating the inner stove), furnace body and heat-keeping layer (it is made of the heat insulating material)

(1) Outer stove

(2) Inner stove
Consist of the stove tank body and the sealed top cap. They are made of the heat resistance thermal steel, three inner stove can be stacked together for saving space and shipping cost.

(3) Smoking recycle tube
During the process of carbonizing, there will be some smoke.( can be burning) the smoke can be collected and returned to the furnace.

(4) Purification tank
This system is consisting of purification tank and the exhaust-heated cycle pipe.

(5) Hoisting equipment
it include the steel hoisting frame and the E-hoist .And it is easy for loading and unloading the stove.