Coconut Shell Charcoal Furnace Charcoal Carbonization Furnace Wood Chips Carbonization Furnace

 Wood chip charcoal carbonization furnace, also known as environmental continuous gasification carbonization equipment, is used to convert carbon-containing wood or agricultural waste into charcoal powder at high temperatures. The raw material is subjected to a destructive distillation process in an oxygen-free environment to achieve a high degree of carbonization. The required material must be less than 15 mm, such as sawdust, rice husks, peanut shells, plant straw, bark and ground coconut shell. Therefore, the equipment is also called a charcoal powder production line.

Feature

working flowchart 

Sawdust carbonization furnace machine process are: primary screening sawdust of different
sizes to eliminate bigger impurity, then drying the materials to be 8-12% water content, and
make carbonization in the end.

 

1.Crusher 

If you raw material is too large ,you need to crush it make it become 3-5mm size.

(click the pictures learn more)

2.Dryer 

If you moisture is too high , you need to use our dryer to dry it make it become 8-12%moisture .

(click the pictures learn more)

Where to use the charcoal powder?

charcoal stick extruder machine

ball shape charcoal briquette machine

Shisha charcoalpress machine 

 Detailed images 

1.Heating part: including three heating chambers (for heating the stove), furnace body and insulation (made of insulating material for heating) and drought-proof fan

 2. Carbonized part: consists of four carbonized tubes, both of which are made of heat-resistant, thermally conductive steel. Under the drive of the machine, when the wood chips reach the end of the tube 1, the wood chips are transported to the tube 1. It will go to the No. 2 tube, and so on, after the four tubes are carbonized, the sawdust will turn into charcoal powder 

3. Gas circulation part: smoke will occur during carbonization. The flue gas can be burned back to the furnace for purification. After purification, the gas circulation pipe can flow into the heating chamber of the main furnace to reheat the machine 

4. Purification and purification part: On this machine, there are two purification tanks, the first one purifies the flue gas (cannot be burned), the other is used to purify the flue gas in the working process, and the flue gas is purified by the purifying system. It turns into water vapor and does not pollute the air

 5. Cooling part: On the back of the machine, there is a tube for cooling hot charcoal powder, so we can get the charcoal powder directly

 6. Control part: The entire machine we will be equipped with an electrical control box to control the three motors.

Gongyi Xiaoyi Mingyang Machinery plant is located in Zhengzhou.Henan province. Our machineryplant is specialize in WOOD BRIQUETTE MACHINE 26 years. 

 There have production line of makingwood charcoal briquette(including crusher , dryer , wood briquette machine, carbonization stove) , 

production line of making wood pellet (including crusher, dryer , wood pellets machine , dust separation plant and packaging machine) 

production line of making coal ball briquette(includingvertical crusher, mixing machine, coal briquette pressing machine and dryer machine for coal briquette) 

and other equipment such as screw conveyor, belt conveyor, scrap conveyor , sawdust carbonization stove, floating fish feed machine and so on.

 Our machines have the best quality and we have got many certification such as CE, ISO, BV.