20-63mm PE Pipe Extrusion Machine Line

Features of our machine PE Pipe Making Machine:

PE series plastic pipe material production line is mainly used in the area of agricultural water supply system, architectural water supply system, pavement of cables, etc. This machine group consists mainly of vacuum calibrating tank, haul-off unit, cutting unit, tilter, etc. single screw extruder and haul-off unit have applied imported A/C inverter, both vacuum pump and driving motor have applied excellent products. The haul-off unit includes two-claw type, three-claw type, four-claw type, six-claw type, eight-claw type, ten-claw type, twelve-claw type, etc. 

This machine is mainly used to process PP, PE, PPR, ABS and other plastics. Equipped with auxiliary machines, it can manufacture  profile, pipes, sheets and other plastic products and granulation. It has the adavantage of simple production technological process, high output, stable quality and low cost.

Machine Picture

1.The extruder and haul-off adopt imported AC frequency control device, vacuum pump and haul-off motors adopt high-quality brand.

2.The haul-off methods are two-claw, three-claw, four-claw, six-claw, eight-claw etc.
3.You may choose saw cutting type or planetary cutting type. It is additionally attached with the length counter and intensifying device.
4.The equipment is with the reliable performance and high production efficiency.

1. SJ 65 Single screw extruder machine:

Screw and Barrel: Design for PPR material, Screw and Barrel Material 38CrMoAlA,Nitriding, Surface Chrome plate, Nitriding Layer Thickness:0.5~0.7mm, Surface Rigidity:800~900HV.

 2. Pipe Mold

 Extrusion mold material: 40Cr. Calibration mold material: Wearable tin bronze ZQSn5-2-5.

3. Vacuum calibration tank

Calibration Tank Length: 6m, Adopt 3mm thickness stainless steel board, Adopt 0.75KW Gearbox Speed Reducer Motor, Adjusting Distance equal to 800mm

4. Haul off and cutting machine

Haul-off Bracket Length 1200mm, Adopt Pneumatic gas cylinder, 

Adopt 1.5kw*2sets ABB Inverter, Belt 80mm*2500mm.

5. Stacker

Stacker length 4m, 1.5mm stainless steel board, 

Stacking by Gas cylinder, Adopt limited switch send out cutting signal.