LXC610 automatic generator control module

Products: 

LXC610 series controller uses 32-bit microprocessor and embedded system control technology, precision measuring 16 parameters, 32 programmable inputs, 35 warning protection parameters, 85 programmable output, a total of 121 configurable parameters. Of which 108 can be configured from the front panel. With LCD graphic display module can display various engine parameters and generator parameters. Being rapidly expanded use in multiple areas, such as: small power plants, biogas power generation, oil power, field engineering, factory, fire pumps, mobile base stations, and many other fields. Suitable for gasoline, diesel, natural gas, biogas and other power equipment, many well-known domestic and foreign enterprises have been widely supporting applications. Completely replace DSE7X0 controller. 

Product performance and features: 

     1, LCD LCD is 132 × 64, in four languages (Simplified Chinese, English, Spanish, Russian) display, touch button operation; 

     2, suitable for three-phase four-wire, single-phase two-wire, three-phase three-wire, two-phase three-wire (120V / 240V) power supply 50Hz / 60Hz system; 

     3, collect and display mains / generator phase voltage, phase current, frequency, power parameters; 

     4, mains overvoltage, undervoltage, phase function, power generation has overvoltage, undervoltage, over frequency, under frequency, overcurrent function; 

     5, various parameters sophisticated collection engine: coolant temperature, oil pressure, fuel quantity, the charger voltage, and depending on the setting for effective protection of the engine, to avoid accidental damage to the engine; 

     6, control and protection functions: automatic diesel generator set start / stop, sub-gate (ATS switch) and perfect protection fault display function; 

     7, with the ETS, idle speed control, preheat control, lifting speed control function, and are relay outputs; 

     8, parameter settings: allows users to change the setting of its parameters, is not lost when the system is powered down, the controller of all parameters can be adjusted from the controller front panel, or by using a PC via a USB programming interface adjustments; 

     9, a variety of temperature and pressure sensors can be used directly, and custom parameters; 

     10, a variety of starting conditions (speed sensor, hydraulic, power generation) optional; 

     11, width (8 to 35) Power supply range VDC, able to adapt to different starting battery voltage environments; 

     12, modular design, flame-retardant ABS housing, pluggable terminal blocks, embedded installation, compact, easy to install. 

Specifications: 

Operating Voltage 

DC8.0V to 35.0V (continued supply) 

Consumers Power 

<3W (Standard mode: ≤2W) 

Input Voltage 

12V AC - 360 V AC (PH-N) of 3-phase 4-wire 

23V AC - 620 V AC (PH-N) of 3-phase 3-wire 

Frequency 

50 / 60HZ 

Speed sensor voltage Vpp 

1.0 - 70Vpp 

Speed sensor frequency 

The maximum 10000HZ 

Start relay output 

10Amp DC28V 

Programmable relay output 

10Amp DC28V 

Power switch programmable relay output 

10Amp 250VAC 

Dimensions 

209mm x 146mm x 26mm 

Hole Size 

214mm x 160mm 

Operating ambient temperature 

(-25~ + 70) ℃ humidity (20~90)% 

Storage conditions Temperature 

(-25~ + 70) ℃ 

Secondary electric current sensor 

5A