MB-M72 Color Coating Mortar

Features:

This is a new type environmental friendly product, owning the natural color, soft sight, low cost price and easy operation, through different method to achieve the various art effects, make a new way for the modern indoor and outdoor wall decoration, meet the development requirement of “safety, environmental friendly, energy-saving”

1, strong cohesive force, good anti-weather function, ensuring the permanent adhesive for the light building materials

2, various color, customers can choose their favorite color   

3, good ventilation, low water absorption rate, small shrinking rate, good anti-infiltration

4, convenient shape, can make different shapes from plane to three-dimensional

5, washing resistance, anti-dirt, self-clean function

6, simple apply, quick operation, reduce materials and price

7, non-toxic, no pollution, safety and environmental friendly

Surface Treatment:

the substrate surface should be firm, dry and clean, no grease, and other loose materials.

Application:

For indoor and outdoor wall decoration (can creative in producing a smooth surface of plaster, fantasy relief, brushed paint and other artistic three-dimensional pattern in the coating bump)

Operation Process:

For the surface:

1, for spraying method:

mix the color mortar with water at the rate of 1:0.38-0.4, pouring water into the stirring barrel, then the powder, using an electric mixer. Using spraying gun to spray the mortar on the surface, at least two times (third time is the best), control the interval time about 2h. after the dry 12~24h, spray the MB special anti-dirt agent

2, for spreading method:

mix the color mortar with water at the rate of 1:0.38-0.4, pouring water into the stirring barrel, then the powder, using an electric mixer, put it aside for 10min, gain the better effect. Using scraper to scrap the mortar on the surface, control the thickness about 2~3mm. after 10min can use various texture tools to roll patterns. After the patterns about 12-24h, spraying 1-2 times of the MB special anti-dirt agent

Normal Amount:

For the spraying: about 2.0~2.5kg/m²; For the spreading: about 2.0~2.5kg/m²; For the trowel operation: about 3~4kg/m²

Cautions:

1, make sure the smooth and vertical rate of the surface before operation

2, use up the new mixed slurry , if the mortar surface is dry, pick off the surface

3, never mix the dry slurry with water and use again

4, roof should extend 50 cm by the wall, to avoid direct polluted water

5, this product requiring the temperature between 5℃ to 40℃

6, never operate under raining

7, for various art effect, consulate our company or related department for the specific operation process

Store Method:

Store in cool and dry place, unopened product can be saved for one year.

Packing:

2kg/bag, 25kg/bag