Single core copper conductor XLPE insulated/steel wire armoured cable

Solid or stranded Copper/Aluminum

Cross-linked polyethylene (XLPE or PVC)

The insulation shall be red, black

Polypropylene lament with lapped binding tape

Polyvinyl chloride (Black)

Galvanized steel wire/steel tape/Unarmored/Aluminum wire

Binding tape

Polyvinyl chloride (Black)

For use in ducts, trays and direct burial in ground. The cable is subject to immerse in water all the time.

This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation.

1.  Environment temperature should be no lower than 0 for laying, the cable fall     without limitation.

2.  The min bending radius of cable is stipulated as follows: Single core: 20(d+D) 5% three cores: 15(d+D) 5% (D is actual diameter of cable; d is actual outer diameter of conductor).

3.  Operation temperature of cable PVC sheath is no more than 90.

4.  Max rated temperature of cable conductor is 90, and no higher than 250 in timeof short circuit (max. Lasting time is no longer than 5s).