24V Conventional Pull Station Manual Call Point For Fire

24V Conventional Pull Station Manual Call Point For Fire

SPECIFICATIONS

Operating Voltage Range:       9~28VDC Volts

Alarm Current                   45 mA @ 24 VDC

Operating Humidity Range:       10% to 93% Relative Humidity, Non-condensing

Operating Temperature Range:    -10°C to 50°C (14°F to 122°F)

Dimensions:                   Length 140mm, Width 105mm, Depth 45mm

Weight:                       Net Weight 220g

BEFORE INSTALLING

NOTICE: This manual should be left with the owner/user of this equipment.

GENERAL DESCRIPTION

The conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches. One 470 ohm resistor is used on the PCB board between Zone+ and Zone- when the switch inside is closed. So the conventional manual call point is only used with conventional fire alarm control panel, it is forbidden to be used to other system.

OPERATION

The manual call points provide a textured finger-hold area that includes Braille text. In addition to PUSH IN and PULL DOWN text, there are arrows indicating how to operate the station, provided for non-English-speaking people.

Pushing in and then pulling down on the handle activates the normally-open alarm switch. Once latched in the down position, the word “ACTIVATED” appears at the top in bright yellow, with a portion of the handle protruding at the bottom as a visible flag.

Resetting the station is simple: insert the key, twist one quarter-turn, then open the station’s front cover, causing the spring-loaded operation handle to return to its original position. The alarm switch can then be reset to its normal (non-alarm) position manually (by hand) or by closing the station’s front cover, which automatically resets the switch.

Loop Design and Wiring

The fire alarm control panel Zone wire can be connected to terminal loop (+), loop (-) unpolarized wire. 

If the manual call point is in the end of the zone wire, a 5.6K resistance should be connected to terminal loop (+), loop (-).

INSTALLATION

NOTE: All wiring must conform to applicable local codes, ordinances, and regulations.

Mounting Indoor Wall

1. Attach mounting base to wall at 1.5 meter’s high.

2. Connect field wiring to terminals

3. To attach product to mounting base.

4. Secure product by tightening the one mounting screws in the front of the product housing.

1. We guarantee that all our items are "as stated" in their descriptions. We strive for 100% customer satisfaction on every sale we complete.

2. We are manufacture, there is no middle man, no high markup, so we can provide quality items yet very competitive price.

3. If you have any questions please contact us first, most are responded with in 12 business hours

Shipmet

1, all package can sent by FedEx/DHL/UPS/EMS, based on customer requires.

2, Freight By Sea to Any nearnest port of customer country.

3, Freight by Air to airport of import country.

Paymnet:

1. T/T

2. West Union

3. Trade Assurance

4. Paypal

1.Quality of our company.

We are the manufacturer of alarm system for more than 10 years, we are full of experience and technology.

2. Quality of our products.

Our engineers who ever worked in a very famous company of alarm system, all the products must be strictly inspected before selling.

3.Quality of our services.

 All of our products have a full two-year warrantyand low repair rate.

4.Quality of our shippment.

 We arrange the shippment as soon as we get the payment, fastly and professionally.

5.Quality of our sales representatives.

  Truly, Warmly, Patiently, Professionally.

Clear picture