Solar water heater patrs P/T Security Valve

                            Solar water heater patrs P/T Security Valve

1. Using Method of P/T Security Valve                                                                         

 Temperature and Pressure Relief Valves is suitable for bearing the pressing type solar water heater,

gas heater,electric heater,water heater of fuel,water heater of heat pump,sensitive function heater,etc.Various kinds of heaters(such as the boiler) and hot water containers.

2. Specification of  P/T Security Valve                                                             

• Standard setting:75,87,100,125,150psi(0.51/0.60/0.69/0.86/1.034Mpa)
• Temperature relief:210 °F(99° °C)
• Dimensions/Weights:

 3. P/T Security Valve Installation                                                                                

     T/P Valves should be installed by a licensed plumber.
     If the temperature probe protruding from inside the inlet thread is damaged or bent,do not install,and obtain a  replacement valve.Clean out all deposits from the threaded boss on the heater before fitting a replacement valve,otherwise the new valve risks contamination and premature failure.

                                                                            Box For One Piece

                                                                                 50 Pieces For One Carton

                                                                       20 CTNS,TOTAL:1000 Pieces