Bass Pressure relief T/P safety valve

                                    Bass Pressure relief T/P  safety valve 

1. Using Method of T/P  safety valve                                                                            

 Temperature and Pressure Relief Valves is suitable for bearing the pressing type solar water heater,

gas heater,electric heater,water heater of fuel,water heater of heat pump,sensitive function heater,etc.Various kinds of heaters(such as the boiler) and hot water containers.

2. Specification of T/P  safety valve                                                                 

• Standard setting:75,87,100,125,150psi(0.51/0.60/0.69/0.86/1.034Mpa)
• Temperature relief:210 °F(99° °C)
• Dimensions/Weights:

 3. T/P  safety valve Installation                                                                                     

     T/P Valves should be installed by a licensed plumber.
     If the temperature probe protruding from inside the inlet thread is damaged or bent,do not install,and obtain a  replacement valve.Clean out all deposits from the threaded boss on the heater before fitting a replacement valve,otherwise the new valve risks contamination and premature failure.

                                                                            Box For One Piece

                                                                                 50 Pieces For One Carton

                                                                       20 CTNS,TOTAL:1000 Pieces