analog panel meter

Specifications

Analog panel meter

Feature

YD8000 series panel meters adopt modular design. Customers may order models in various dimensions according to the application. The meters with PIC chip have strong resistance to interferences, and the performance/cost ratio is high.

Installation,Material & Isolation

Installation modeMounting installation,wring at the back

Material of outer caseNon-flammable

Isolation Between power supply/input/output

Performance

Measurement: Single Phase Power Factor

Measuring range: 0-360°

Accuracy: ≤±0.02 PF

Input Range: Voltage: AC 90-380V

Current: AC 0-5A

Display range: - 1- 0- 1

Measuring speed: About 1.5 times/s

Frequency: 40-60Hz

Polarity indication: Capacitive loading

Power supply: AC220V±20,50/60Hz

Power consumption: ≤2VA

Working frequency withstands voltage: Between power supply/input/output: ≥AC2kV/min·1mA

Insulation resistance: ≥100MΩ

Operating Notice

n          The operating environment allows no electric dust or gases that corrodes metal or destroys insulation.

n          Operating conditions: temp.: -10-50, RH 10-95The altitude is less than 2500m.

n          User shall connect the measured signal source and auxiliary power supply correctly according to the plate on the outer case of the meter.

n          No extra setting is needed. Only connect the meter to the measured signal source and the auxiliary power supply.