0.6/1kV AL PVC ARMOURED POWER CABLE

May be you are also interested about 

0.6/1kV AL/XLPE/PVC(or PE) Power Cable

0.6/1kV CU/XLPE/PVC(or PE) Power Cable

0.6/1kV CU/XLPE/SWA/PVC(or PE) Power Cable

0.6/1kV CU/XLPE/STA/PVC(or PE) Power Cable

0.6/1kV AL/PVC/ PVC (or PE) Power Cable 

0.6/1kV CU/PVC/PVC (or PE) Power Cable 

0.6/1kV AL/PVC/SWA/PVC(or PE) Power Cable 

0.6/1kV CU/PVC/STA/PVC(or PE) Power Cable

Why Choose us?   

For over 20 years, Zhengzhou Jinyuan Wire and Cable Co., Ltd., as a professional cable manufacturer has been producing customized cable for a wide range of applications based on high quality, excellent service and competitive market prices. This is an elite team with experienced personnel and strong technical support. Our achievements benefit by having access to the largest market for cheap labor and abundant resources in China and our determination to exceed our clients’ expectations.

PRODUCTS & STANDARDS

We can produce more than 2,000 types of cables and wires, such as

Bare Conductor: AAC, AAAC, ACSR, ACSR/AW, ACAR, ACSS, ACSS/AW, Aluminum Clad Steel Wire/Strand, Bare Copper Conductors, Copper Clad Steel Wire/Strand, Copper Clad Aluminum(CCA), Galvanized Steel Wire/Strand, etc.

Overhead Insulated Cable: Covered Line Single Core Cable and Aerial Bundled Cable (ABC). ABC includes Duplex, Triplex, Quadruplex and more Cores Service Drop Cable.

PVC Insulated Wire up to 450/750V

PVC or XLPE Insulated Power Cable from 1kV to 36kV

Control Cable

Welding Cable

Rubber Cable

We can produce cables according to the standards of IEC, ASTM, EN (BS, DIN, NF, etc.), AS/NZ and meet customers’ special requirements.

ACHIEVEMENTS & COMMITMENT

Our cable has been exported to South-East Asia, South Asia, Middle-East, Europe, North and South America, Africa, Australia & New Zealand and so on. Zhengzhou Jinyuan Wire and Cable Co., Ltd.’s commitment is to be recognized as a zero-defect world class manufacturer in cable industry through continuous improvement of our quality, processes, and products, and by our determination to exceed our clients’ expectations. 

ALUMINUM PVC SWA POWER CABLE

0.6/1kV AL/PVC/SWA/PVC(or PE) Power Cable

1. Description

2. Operating Characteristics

Rated voltage: 0.6/1(1.2)kV 

Max. permissible continuous operating temperature of conductor: 70 °C 

Max. temperature of conductor during short-circuit (5s max. duration) shall not exceed: 

Nominal cross section of conductor ≤300mm2: 160 °C 

Nominal cross section of conductor >300mm2: 140 °C 

The ambient temperature under installation should not be lower than: 0 °C The bending radius of cable is recommended as following:

For single core cable: not less than 15 times of the diameter of cable 

For multi-core cable: not less than 12 times of the diameter of cable 

When the armored single core cable used for Alternative Current(AC) system, the armoring material should be non- magnetic.