Platinum curing Low Viscosity Silicone Rubber AB liquid 1:1 ratio translucence

Widely used in casting or injection molding products such as cake   molds, chocolate molds, sugar art molds, ice cream and other food molds.

1. Mix components A and B in a 1:1 weight ratio and stir evenly

2. Place the evenly mixed silicone rubber in a vacuum machine and   remove bubbles by vacuum

3. After removing bubbles by vacuum, pour or inject into the mold   (before use, apply detergent or mold release agent to the mold to make it   easier to remove the mold.)

4. After completing the above steps, place it at room temperature   for 2-12 hours to fully cure; heat it to 80-100 degrees and it can be fully   cured within 10 minutes.

Product：Silicone rubber

Component：A+B

NO.:HF-7509

Color：Translucence

Hardness:25A（±2）

Ratio:1:1

Note: The above data can be customized according to   requirements.

This product needs to be sealed and stored   in a ventilated, cool and dry place. It does not belong to dangerous goods   and can be transported as non-dangerous goods.

Shelf life 12 months

A/B series standard packaging is 1kg/10kg/50kg/400kg（drum）

Warm reminder

When   operating this product, the mold and silicone rubber must not come into   contact with heavy metals, tin, lead and other environmentally unfriendly   materials, otherwise the silicone rubber will not cure