Guangzhou Yingpeng Explosion-proof Portable Generator-GX22

Brand: Yingpeng

Model: BFM-10YB/GX22

Waveform: pure sine wave output, portable, intelligent voltage regulator

Variable frequency power: single shed 4-stroke, overhead valve, forced air cooling

Exhaust capacity: 113cc

Compression ratio: 8.0:1

Rated speed: 5000 rpm

Ignition system: non-contact transistor ignition

Starting system: manual start/intelligent electric start

Fuel tank capacity: 4L

Fuel: unleaded gasoline, engine oil capacity: 600ML

Oil: SF 5W-30,10W-40

Rated frequency: 50Hz

Rated voltage: 230V

Rated AC current: 8.1A

Rated AC output: 1800

Watt peak AC output: 2200 watts

DC output: 12V 5A

Total harmonic distortion: ≤ 2%

Load power factor: 1.0

Frequency stability: ± 0.1Hz

Voltage stability:+3V

Seven meter noise index: 61 decibels

Continuous working time: 6 hours

Fuel consumption rate: 500mL/KW. h

Weight: 22kg

Size: 500x300 × 480mm mm

Explosion proof grade: ExdibmbIICT4Gb

Product features:

1: Novel appearance, small size, light weight, low waveform distortion rate, stable frequency, and low fuel consumption.

2: Precise ignition control, intelligent speed control based on load, fuel saving not only a little, but also economical and efficient

3: Short circuit protection is more convenient, safe, reliable, and effective

4: Humanized design concept, integrated inverter control, easy panel operation

5: The unique three pipe intake design achieves simultaneous cooling of various internal devices

6: A two chamber circulating exhaust device separates the exhaust gas from the fuel, allowing it to fully burn

Working principle of portable generator:

Portable generators are mainly composed of components such as stator, rotor, end cover, brush, base, and bearings. The stator is composed of a base, stator core, wire wrapped winding, and other structural components that fix these parts. The rotor is composed of rotor iron core, rotor magnetic pole (with magnetic choke and pole winding), slip ring, (also known as copper ring or collector ring), fan, and shaft components. The stator and rotor of the generator are connected and assembled through the bearing, base and end cover to enable the rotor to rotate in the stator. A certain excitation current is passed through the slip ring to make the rotor become a rotating magnetic field. The stator coil moves to cut the magnetic line of force, thus generating induced potential. The current is generated when it is led out through the terminal and connected to the circuit.

Scope of application: It can be applied to environments with combustible gases, dust, fire or overheated objects, and even explosions, such as coal mines, paint shops, flour mills, machinery for transporting and storing combustible gases and liquids, and warehouses (oil tank trucks, oil and natural gas transportation systems, gas stations, and liquefied gas stations, etc.) where combustible gases are present in chemical workshops.