Guangzhou Yingpeng explosion-proof ton drum heating blanket - silver white

Brand: Yingpeng

Model: 1000L

Color: black, silver white

Black: not resistant to acid, alkali, or corrosion

Silver white: acid and alkali resistant, corrosion resistant

Voltage: AC 220V/110V 50HZ

Power: 2400W

Size: 4400 * 1000mm

Inner fabric: single liquid silicone tape

Outer fabric: single liquid silicone tape

Insulation material: needle felt 10mm

Style: Explosion proof version

Heating type: self-control temperature explosion-proof wire 45w/m

Design wattage: 53.4 meters automatic temperature control explosion-proof line, 2400w

Junction box: explosion-proof junction box

Explosion proof plug: Delixi plug

Product features:

1. High heating temperature, up to 120 ℃

2. Multiple power levels are available for selection

3. Heating form: fully wrapped on the side, evenly heated, with high heating efficiency

4. Unique design with dual layer temperature protection

5. Durable and durable, with a long service life

6. Easy to install and disassemble, with installation locking buckle

7. The medium that can be heated can be low-temperature fluid, similar to wax and gel, and can ensure that the chemical properties of the fluid remain unchanged

Technical note: This heating blanket is designed for IBC ton barrels and is powered by a 220V power supply. Before use, professional electricians must confirm that the power cord wiring is correct. It is not allowed to use 380V dual line power supply, otherwise it will cause serious damage to the electric blanket.

matters needing attention:

1. When using, attention should be paid to the local voltage (rated voltage 220V). Insufficient voltage will lead to insufficient power. In this case, satisfactory heat cannot be achieved within the effective time (10 to 40 minutes), which is not a quality issue of the heating sleeve. If the voltage is too high, it can cause unexpected temperature rise too fast. In this case, it is prohibited to use.

2. It is prohibited to connect industrial electric blankets to a DC power source for use.

3. When the heating sleeve is placed in a folded state, it is not allowed to be powered on. Only after the heating blanket is installed can it be powered on.

4. When the heating sleeve is in energized operation, it should not be left for more than 1 hour, nor should it go out during use to prevent accidents. When not using an electric blanket, the power supply of the blanket should be cut off or the power plug of the blanket should be unplugged to eliminate the risk of fire accidents.

5. Prevent sharp objects from puncturing the insulation layer of the electric heating wire. When using, the heating sleeve should not apply excessive pressure locally to prevent deformation of the electric heating wire. And regularly check if there are signs of wear or damage on the electric blanket. If there are such signs or if the product has been mistakenly used, it should be returned to the manufacturer for maintenance before the next use.

6. To avoid burns to the human body, non professional personnel should not use it. During construction, it is strictly prohibited to ignite (such as cigarette butts or sparks) to prevent fires. It is prohibited to use it together with other heating appliances and to heat other heating appliances.

7. Do not expose to sunlight, bake, or iron to avoid damage to the insulation of the heating line. The power cord cannot be replaced, and it is prohibited to disassemble or repair it on its own. If the cord is damaged, this product will be scrapped.

8. Do not unplug the plug by pulling the power cord, do not drag the product by pulling the flexible cord, do not wash or dry clean, and do not connect the power supply when it is wet.

Main applications:

Chemicals, petroleum media, resin heating, water, demineralized water heating, butter, engine oil, lubricating oil, aviation oil heating, vaseline heating, food additives, flocculants, spices, essence heating, oil heating, liquid medicine heating