Yingpeng Military Industry Factory Explosion proof Dehumidifier

Product Introduction:

Parameters:

Digital display movable explosion-proof dehumidifier: BCF-7138C

Power supply:~220V 50Hz

Current: 8-9.6A

Dehumidification capacity: 138 liters/day (30 ℃ CRH80%)

Applicable temperature: 5 ℃ -38 ℃

Gross weight: 65KG

Volume (high × wide × Depth: 1045mm × 520mm × 414mm

Packaging volume: 1150mm × 610mm × 510mm

Explosion proof sign: Ex db ib mb IIC T4 Gb

Fully automatic humidity control; RH30-95% adjustable at will

◎ Dual display of humidity and temperature

◎ 1-24-hour timed shutdown setting

Three minute delay start to protect the compressor

◎ Overvoltage and undervoltage protection

◎ Sensor fault self diagnosis function

◎ Sensor fault self diagnosis function

Micro computer automatic defrosting, suitable for low-temperature environments.

More reliable and precise than mechanical automatic defrosting

Suitable for large places such as manufacturing workshops, factories, warehouses, etc

(Applicable area: 150-220 square meters, with a floor height of about 2.6 meters)

The explosion-proof dehumidification series models produced by our company are processed through explosion-proof technology and widely used in hazardous areas such as national defense, scientific research, petroleum, chemical, pharmaceutical, processing and manufacturing, and biology, where there are Class IIA and IIB flammable gases, T1-T4 groups, steam, and air mixed to form explosive atmospheres. They are dehumidification and temperature control equipment designed for places with moisture-proof and dehumidification requirements, with various functions such as dehumidification, low heat, and ventilation. The series of products have passed the inspection of the explosion-proof electrical product quality supervision and testing center and obtained the explosion-proof electrical equipment explosion-proof certificate: explosion-proof dehumidifier CNEX08.2285/2286; Its appearance is beautiful, its design is reasonable, and it is easy to install and maintain. The entire series of explosion-proof products use compressors, microcomputer control, and temperature and humidity switching display internally, which has the advantages of low noise, stable performance, and easy operation. Deeply loved by customers in the industry, and partially entered into industry designated procurement.

The explosion-proof label of the entire series of explosion-proof dehumidifiers is Exdmbib II BT4.

The execution standards for this series of products are as follows:

GB3836.1-2000 Electrical Equipment for Explosive Gas Atmospheres - Part 1: General Requirements

GB3836.2-2000 Electrical Equipment for Explosive Gas Atmospheres - Part 2: Flameproof Type "d"

GB3836.4-2000 Electrical Equipment for Explosive Gas Atmospheres - Part 2: Intrinsically Safe "ib"

GB3836.9-2006 Electrical Equipment for Explosive Gas Atmospheres - Part 9: Encapsulated "m"

GB3836.15-2000 Electrical Equipment for Explosive Gas Atmospheres - Part 15: Electrical Installation in Hazardous Areas (excluding Coal Mines)

JB/10538-2005 "Explosion proof dehumidifiers and air conditioners"

The explosion-proof dehumidifier can operate normally under the following environmental conditions:

a. The altitude does not exceed 2000m;

b. Applicable environment: temperature between 5 ℃ and 38 ℃, without corrosive gases;

c. There are explosive hazardous areas with Class IIA and IIB, T1 to T4 combustible gases, vapors, and air mixed together.