Depth Cellulose Elements

Warm Tips: 

We can supply most of the manufacturers of filter accessories, complete model, the goods quickly, quality assurance.

Limited space, not one by one show, if demand, please contact, thank you!

Air filtration, liquid filtration, gas filtration, hydraulic oil filtration, petroleum filtration, 
dust filtration, coalescers, separators - we can all produce!
No matter which brand - we can produce!
No matter which model - we can produce!
You have needs - please contact us.

Depth elements are used in low flow filtration systems such as applications containing soft contaminants, sludge, slime, or waxes. Fluitek depth elements are most commonly used to clean or recycle hydraulic oil, compressor oil, gear oil, quench oil, or various other fluids with off-line or side-stream kidney loop systems.

This series of elements is available in several different sizes and forms. There are a lot of different options of medias including cellulose and synthetic fiber blended medias. Fluitek depth filters are available in an efficiency range from 1 – 150 micron and up to a 350°F max temperature rating. The prime advantages of depth filtration elements are high dirt holding capacity, long filtration cycles, and high retention of small particulate in polishing applications.

• Key Benefits

• Helps clean (not just screen) the oil by dislodging contaminants

• Achieves particle removal below 1 micron

• Standard Features

• Axial flow between the layers of the media Performance B<(c) = 1,000 (per ISO 16889)

• High dirt-holding capacity

• Can maintain moisture to levels below 50 ppm

• Micron Filter Rating 3

• Media & Wound Cellulose

• Endcap Seals

• Positive, deep penetrating seal toprevent oil from bypassing media.Made of PPE for superior chemicalresistance.

• Gaskets and O-Rings

• Buna-N standard; Viton? optional

• Micron Rating      3

• Holds up to 10 lb of dirt per element

• Adsorbs up to 1 gallon of water per element

• Interchangeable with all industry standard size Depth Filterelements. Call LE at (800) 537-7683 for cross-reference.

• Depth Filter by Oil Viscosity

• ISO VG 10-32

• LEX-DMF-500

• LEX-DMF-750

• LEX-DMF-1006

• ISO VG 32-68

• LEX-DMF-500

• LEX-DMF-750

• LEX-DMF-1004

• ISO VG 68-150

• LEX-DMF-1006

• ISO VG 150-460*

• LEX-DMF-1008

• Note

• *Maximum recommended viscosity of 460

• The size references the number of cubic inches of filter media contained in the element.For example, a size 1000 filter has 1,000 cubic inches of filter media.

• Caution

• Depth filter media should not be used for water removal purposes. Call LE at (800) 537-7683 for moreinformation or assistance in selecting the appropriate filter for your application.

We offer an extensive cross for the following brand

Our filtration equipment is used in a wide range of industries:

Advanced production process: