AK 15/25,AK 27/27,AK 38/40,AK 38/60 Filter Inserts For CC Jensen CJC Oil Filtration Systems

Warm Tips: 

We can supply most of the manufacturers of filter accessories, complete model, the goods quickly, quality assurance.

Limited space, not one by one show, if demand, please contact, thank you!

Air filtration, liquid filtration, gas filtration, hydraulic oil filtration, petroleum filtration, 
dust filtration, coalescers, separators - we can all produce!
No matter which brand - we can produce!
No matter which model - we can produce!
You have needs - please contact us.

Fine Filters are offline oil filtration systems with integrated circulating pump for off-line installation. The filters are recognized around the world as highly efficient purification systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more.

Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish). The Depth Filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.

Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil. The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.

AK filter insert

Specially designed for filtration and removal of humidity from low viscosity oils

The AK Filter Inserts are based on the standard A Filter Inserts, but extra dried and vacuum packed, so the cellulose filter media contains no humidity. It is designed with fine filtration, high dirt and water holding capacity in mind, resulting in a low cost for removing one kilo of contamination from oil.  

Due to the relatively high-pressure loss compared to other inserts, the AK Filter Inserts are primarily used for low viscosity or warm oils, where below 50 ppm of humidity content is required. 

The AK Filter Inserts remove all four contamination types in one and the same process: particles, water, varnish, and acidity. The AK Filter Inserts are used in Fine Filters HDU series.

Used for maintenance of below applications: 

Transformers

Tap changers

Small hydraulic systems

Contamination Capacities

Based on field experience we have observed that the total Dirt Holding Capacity (DHC) is dependent on shape and density of particles and other variables within an oil system. 

When saturated, the total weight of accumulated contamination depends on the application, the combination of contaminants, as well as the density of the captured contamination. 

Your benefits with 

Filter Inserts have the highest dirt holding capacity on the market due to special cellulose-based material. Furthermore, the unique construction of the bonded discs, creates a large filtration area resulting in reduced costs of ownership. The Filter Inserts are a modular design, which allows them to fit any applications and requirements.

The Filter Insert features:

Depth media of moulded cellulose

Highest Contamination Capacities (DHC)

100% natural cellulose fibres

Removal of contaminants, 4-in-1:

Particles:

Lifetime of both oil and component are increased considerably.

Oil degradation products:

Avoid sticking valves, lacquering, and varnish on metal surfaces.

Water:

Reduce the risk of micro-pitting, bacterial growth, sludge etc.

Acidity/TAN:

Reduce oil ageing and wear on equipment.

We offer an extensive cross for the following brand

Our filtration equipment is used in a wide range of industries:

Advanced production process: