F 15/25,F 27/27, F 2x27/27, F 38/40,F 38/60 Filter Inserts For CC Jensen CJC Oil Filtration Systems

Warm Tips: 

We can supply most of the manufacturers of filter accessories, complete model, the goods quickly, quality assurance.

Limited space, not one by one show, if demand, please contact, thank you!

Air filtration, liquid filtration, gas filtration, hydraulic oil filtration, petroleum filtration, 
dust filtration, coalescers, separators - we can all produce!
No matter which brand - we can produce!
No matter which model - we can produce!
You have needs - please contact us.

Fine Filters are offline oil filtration systems with integrated circulating pump for off-line installation. The filters are recognized around the world as highly efficient purification systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more.

Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish). The Depth Filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.

Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil. The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.

F filter insert

Offers various kinds of Filter Inserts type F removing contamination in one and the same process: particles, water, bacteria and asphaltenes from diesel plus varnish and acidity from oils.

1. Type F:

F Filter Inserts, designed for purification of diesel and filtration of thermal oils. Attractive due to a good balance between high dirt holding capacities and low operation costs.

Used in the Filter Separators PTU, it will separate water from light distillates:

Diesel

Gas oils

Used in a Fine Filters HDU, it will remove large amounts of particles, varnish and sludge from:

Quenching oils

Heat transfer oils

2. Type FA:

FA Filter Inserts, designed for purification of light distillate diesel and gas oils. Tolerate large amounts of free water and have less tendency to block due to water in diesel, compared to the standard F 27/27. 

Used for purification of light distillates:

Diesel

Gas Oils

3. Type FB:

FB Filter Inserts, designed for purification of light distillate fuels and gas oils. For systems only slightly contaminated with water. Used for transfer diesel filter for smaller engines or in offline diesel filter applications, where a Filter Separator, PTU is required.

Used for purification of light distillates: 

Diesel 

Gas oils

F filter insert

Specially designed for filtration of diesel and thermal oils

The F Filter Inserts are designed with fine filtration, high dirt holding capacity and low operation cost in mind. The F inserts remove contaminants like particles, water, bacteria and asphaltenes from diesel plus varnish and acidity from oil in one and the same process. The F Filter Inserts can be used in both Fine Filters HDU series and Filter Separators PTU series.

Used in the Filter Separators PTU it will continuously separate water from light distillates:

Diesel

Gas oils

Used in a Fine Filters HDU it will very cost efficiently remove large amounts of particles, varnish and slugde from:

Quenching oils

Heat transfer oils

Contamination Capacities

Based on field experience we have observed that the total Dirt Holding Capacity (DHC) is dependent on shape and density of particles and other variables within an oil system. 

When saturated, the total weight of accumulated contamination depends on the application, the combination of contaminants, as well as the density of the captured contamination. 

Your benefits with 

Filter Inserts have the highest dirt holding capacity on the market due to special cellulose-based material. Furthermore, the unique construction of the bonded discs, creates a large filtration area resulting in reduced costs of ownership. The Filter Inserts are a modular design, which allows them to fit any applications and requirements.

The Filter Insert features:

Depth media of moulded cellulose

Highest Contamination Capacities (DHC)

100% natural cellulose fibres from sustainable resources;

no plastic, no metal, no chemical

Removal of contaminants, 4-in-1:

Particles:

Lifetime of both oil and component are increased considerably.

Oil degradation products:

Avoid sticking valves, lacquering, and varnish on metal surfaces.

Water:

Reduce the risk of micro-pitting, bacterial growth, sludge etc.

Acidity/TAN:

Reduce oil ageing and wear on equipment.

OEM requirements

Experience and application knowledge of ensure that solutions can meet specifications from OEMs on oil cleanliness.

How to ensure Clean & Dry oil

Remember to change Filter Inserts according to pressure gauge or at least once a year in order to ensure clean & dry oil! - Click here to learn how to replace a Filter Insert.

We offer an extensive cross for the following brand

Our filtration equipment is used in a wide range of industries:

Advanced production process: