German technical background VOK-W966 Wetting dispersant Good viscosity reduction and sedimentation prevention effect replaces BYK-W966

German technical background VOK ?- Disper W966 Wetting Dispersant

VOK ?- Disper W966 is a wetting and dispersing agent used to reduce viscosity and prevent sedimentation in unsaturated polyester resin, acrylic acid, polyurethane and epoxy resin filling systems. For fiber reinforced spray and hand paste resin, adhesive and cobalt promoted putty formulation. It is the aromatic free solution of ANTI-TERRA-U 100.

Product Information

chemical composition 

Salt solution of unsaturated polyamine amide and acid polyester

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Amine value: 19mgKOH/g

Acid value: 26mgKOH/g

Density (20 ° C): 0.87g/ml

Non volatile matter (10min, 150 ° C): 52 ＜%

Flash point: 38 ° C

Storage and transportation

Mix well before use. Delamination or turbidity may occur. Heat to 30-60 ° C and mix well.

Application field

Room temperature curing system

Product features and advantages

The wetting and dispersing additive can improve the dispersion of various commonly used fillers, such as calcium carbonate and aluminum hydroxide. It can reduce the viscosity of the filling resin and increase the filling amount. In most cases, the settlement of filler during storage and processing is reduced.

Recommended use

The additive is used as a wetting and dispersing additive in fiber reinforced spray and hand paste resin filling systems and cobalt promoted putty formulations, especially in unsaturated polyester resins. It is also recommended for acrylic resin, polyurethane resin system and epoxy resin.

Recommended dosage

0.5-1.5% dosage of additives (purchased form) is based on filler.

The above recommended dosage is for reference, and the appropriate dosage shall be determined through a series of tests.

Adding method and processing guidance

In order to obtain good performance, the additive should be added before adding solids.

Adhesives&Sealants

Product features and advantages

The additive improves the wettability and dispersion of various mineral fillers, such as calcium carbonate and aluminum hydroxide (ATH), thereby reducing the viscosity and increasing the filling amount. At the same time, the settlement of the filler is usually reduced to prevent the occurrence of the bottom.

Recommended use

The additive is recommended for adhesives of polyurethane, epoxy and acrylic resin types.

Recommended dosage

0.5-1.5% dosage of additives (purchased form) is based on filler.

The above recommended dosage is for reference, and the appropriate dosage shall be determined through a series of tests.

Adding method and processing guidance

In order to obtain good performance, the additive should be added before adding solids.