German technical background VOK-W995 Wetting dispersant Recommended for stable viscosity in BMC replaces BYK-W995

German technical background VOK ?- Disper W995 Wetting Dispersant

VOK ?- Disper W995 is a wetting and dispersing agent for unsaturated polyester and epoxy filling systems.

Product Information

Chemical composition

Polyphosphate solution

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Acid value: 53 mg KOH/g

Density (20 ° C): 1.03 g/ml

Refractive index (20 ° C): 1.462

Moisture content:<0.13%

Non volatile matter (10 minutes, 150 ° C): 52%

Flash point: 42 ° C

Storage and transportation

Delamination or turbidity may occur, heat to 30-40 ° C and mix thoroughly before use.

Application field

SMC, BMC, pultrusion

Features and Benefits

Wetting and dispersing agent for low ripple/low shrinkage and high filling epoxy systems. It is also applicable to the stability of viscosity in BMC.

Recommended use

Low ripple and Class A surface formula

Low shrinkage formula

Epoxy system

Pultrusion forming

Stable viscosity in BMC

Recommended dosage

When used for wetting and dispersing, 1-2% additives (purchased form) are based on the amount of filler.

When used to stabilize viscosity in BMC, 0.5-2% additives (purchased form) are based on resin amount.

The above recommended dosage is for reference, and the appropriate dosage shall be determined through a series of tests.

Adding method and processing guidance

VOK ?- Disper W995 shall be added to the resin mixture before uniformly mixing and adding pigments and fillers.