Home
Product Categories

Fiberglass Products

Water tank

Waste water treatment media

Ungrouped

Tube Settler

Tower Packing Media

Septic tank

New products

Manhole Cover

Bubble Air Diffuser

Duct Rodder

Drift Eliminator

Cooling tower sprinkler

Cooling Tower Nozzle

Cooling Tower Filler

Cooling tower air inlet louvers

Cable roller
Company Profile

Company Introduction

Photo Gallery
Blog
Quality Control
Contact Us

Home > Products > Cooling Tower Filler > PVC Corrugated Filling Sheet 750mm 950mm KK Type Cross-Flow Cooling Tower Fill

PVC Corrugated Filling Sheet 750mm 950mm KK Type Cross-Flow Cooling Tower Fill

FOB Price

Negotiable

1 (Min. Order)

Payment TermsT/T Credit Card

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Description

Cooling Tower Fill, also named as cooling tower filler, cooling tower infill, cooling tower fill media, cooling tower fill package, consists of thermoformed corrugated sheets made of rigid polyvinyl chloride (PVC), impervious to decay, fungus and biological attack. The cooling tower fill sheets are bonded to form modules which can be designed to fit any application.

Cooling tower fill also called cooling tower heat transfer media, it is an essential component in the cooling tower. Variations in total surface area, pressure drop, and material of construction are readily available to the consumers to optimize the cooling tower for a specific water quality and water temperature.

The use of alternate cooling tower fill media should not be considered a substitute for a proper water treatment program or solids filtration (if required) that matches the required application. "Contamination" references in this document refer to suspended and dissolved solids, process particulates, oils, and grease, not bacteria or biological contamination.

PVC Corrugated Filling Sheet 750mm 950mm KK Type Cross-Flow Cooling Tower Fill

The unit sheet size is 730 mm (width) x 730 mm (length) x 0.3 mm (thickness). Width is certain, and the length is optional. 900 mm, 1000 mm are also can be made. Black and gray colors are popular. It is very similar with America ML cooling tower fill with same 2 sides drift eliminator and same round shape holes hanging on the fiberglass tube in the tower. Sharp wave design on the surface bring good meet area of the water flow.

Product Specification

PVC Corrugated Filling Sheet 750mm 950mm KK Type Cross-Flow Cooling Tower Fill

Name	KK Type Cooling tower fill
Other name	Cooling tower filler, cooling tower infill, cooling tower fill package, cooling tower fill media, cooling tower filling
Material	PP, PVC, CPVC
Color	Grey, black
Width	730mm
Length	730mm, 900mm, 1000mm
Thickness	0.27mm ~ 0.4mm
Pitch	19mm ~ 20mm

Product Feature

PVC Corrugated Filling Sheet 750mm 950mm KK Type Cross-Flow Cooling Tower Fill

1. Acid proof

2. Alkali-resisting

3. Anti corrosion for the organic solvent

4. Good performance of inflaming retarding

5. Increasing cross-sectional area

6. Add water retention time

1, Good raw material of 100% new PVC.

2, Proper glue point for you to install the cooling tower fill in block easily. 3, Size can be cut by customer or we cut the stipulated size for customer 4, Loose sheet can be loaded in the container with less space. 5, Supply the freely glue sample or glue a small sample to indicate you how to glue them.

To make sure the best quality of cooling tower fill media, we Lanyu company make the raw material PVC plate ourselves 100% new polyvinyl chloride particle, even some of our PVC plates are introduced from Taiwan. So that the cooling tower fill package will not deform during usage.

The raw material for cooling tower fills are same, they will come out in different designs via thermal pressure with different mold. We can also build new mold according to your request. In fact, we have many different series, you can choose the type you need. PP and PVC material are for options. PP fill sheets are high temperature resistant. But most popular material is PVC sheets. It's economic.

In order to save the shipping cost, we advise to glue the fills in customer’s site. When it finished gluing, customers can cut their certain block size to suit for their square brand cooling tower. Please pay more attention to the following things in the gluing:

* Please do not expose the LC PVC fill under the strong sunshine to avoid any deformed. If the outside temperature is higher than 40 degree, the PVC film fill will be deformed within 1-2 hours under the strong sunshine. No matter it is 100% new PVC or recycle PVC, the strong sunshine will deform it very fast.

* Please do not use the airtight or air impermeability material packing the BL PVC fill, such as the transparent plastic film or bubble plastic film. That will keep the PVC fill in a higher temperature without any cool air come in and may bring some deformed.

* Please do not use the PVC LC cooling tower fill if the water temperature is more than 60 degree.

Production Process

PVC Corrugated Filling Sheet 750mm 950mm KK Type Cross-Flow Cooling Tower Fill

Package and Transportation

PVC Corrugated Filling Sheet 750mm 950mm KK Type Cross-Flow Cooling Tower Fill

Packing method: carton & plastic film, pallet, wooden box or crate; applicable to the container shipping.

Deliver Time: within about 15 days after receiving the deposit or according to the quantity of your order.

Transport: by sea, by air, by express delivery.

Related Products

PVC Corrugated Filling Sheet 750mm 950mm KK Type Cross-Flow Cooling Tower Fill

Our Service

1. High Quality: Excellent quality is our first pursue, we have strict quality control by our QC team.

2. Big Capacity: Constantly introducing new equipment to meet clients production requirement and market change.

3. Professional Team: Professional development team, purchase team, production team, inspection team, sale team, to provide the best service for our customers.

4. High Efficiency: 24 hours online service (Email, Trademanager, WhatsApp, Wechat) to solve all your questions.

6. Payment: Flexible payment ways, making the payment more convenient and easy.

5. Customization: Size & shape could be made as customer requirement.

FAQ

Q: How do you guarantee your product quality?

A: 100% of our products would be tested before delivery. To control quality, we are using high quality materials from high quality supplier.

Q: Are you a trading company or a manufacturing factory?

A:We are a manufacturing factory with export qualifications. Our factory is one of the best FRP products manufacturer in China. We have FRP products of high quality and various designs.

Q: I am interested in your products, could I get a sample for free? A: We could supply a few pieces of FREE samples if we have some in stock. All you need to do is to kindly offer your shipping account. Q: Can you do the design for us?

A: Yes. With experienced teams in fiberglass product design and manufacturing, we could provide customized shape, dimension, colors service, etc.

Welcome your order, we would give feedback within 24 hours.

Contact Us

Hebei Lanyu Rubber & Plastic Products Co., Ltd.

*Email
Please enter Your valid email address.
*To

Hebei Lanyu Rubber & Plastic Products Co., Ltd.
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Fiberglass Products	Water tank	Waste water treatment media	Ungrouped
Tube Settler	Tower Packing Media	Septic tank	New products
Manhole Cover	Bubble Air Diffuser	Duct Rodder	Drift Eliminator
Cooling tower sprinkler	Cooling Tower Nozzle	Cooling Tower Filler	Cooling tower air inlet louvers
Cable roller

PVC Corrugated Filling Sheet 750mm 950mm KK Type Cross-Flow Cooling Tower Fill

You May Like

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category