SAT CM3142-01-03

Brand:SAT

Type:CM3142-01-03

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Module of PLC, DCS, ESD system card, the card is a vibration monitoring system, steam turbine control system module, the advantages of the gas generator spare parts brand: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts of our products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.

The configuration section typically ends with a –1. This code is used to instruct the sqDriveConfig Utility to execute a drive CONFIG after the parameters have been downloaded. After changing certain drive parameters (primarily motor and feedback parameters), the drive will be in a "Not Configured" state and will require the execution of CONFIG to configure the drive. File Footer #end – Designates the end of the parameter map file. 9.3.4.2. DRIVE CONFIGURATION FILE The drive configuration file contains the actual parameter values. The file has a one-line header that identifies the following: ? node number ? drive number ? drive identification ? firmware version number The drive configuration file must match the map file, the firmware version of the drive being addressed, and the location of that drive on the SynqNet network. Here is an example of the header line: # sqNode[3] drive[0] "Kollmorgen S200" "2.0a" This header shows that the file contains data for the S200-SynqNet drive that is located on Node 3. The header also specifies that the drive has firmware version 2.0a. If the drive does not have this version, an error message will be displayed. The rest of the file consists of parameter command strings followed by their values. For an example, see the Sample Drive Map File. The easiest way to create a template for the drive configuration file is to read a file of data from a drive. It is important that the map file exists and is valid.

ACCESSORIES, CONNECTOR KITS, AND CABLES S200 drives are not shipped with a connector kit or serial communication cable. Customers are responsible for ordering the proper connector kit(s) and other accessories necessary for drive setup. For assistance in proper selection, please contact a sales representative. 10.1 ACCESSORIES 10.2 CONNECTOR KITS Part Number Description P7S2-232-9D RS232 serial communication cable (DB-9 to Mod Jack) -- 6 feet. 768-026902-01 Terminal Block adaptor for J4 I/O connector. MSM20001 S200 Base/SynqNet User Manual. Part Number Description CK-S200-MF Motor power and feedback mating connectors for S200 AC or DC units. CK-S200-IP-DC I/O and input power mating connectors for base S200 DC drive. CK-S200-IP-DC-TB I/O and input power mating connectors for base S200 DC drive with terminal block adaptor for I/O connector. CK-S200-IP-AC I/O and input power mating connectors for base S200 AC drives S20260, S20360, S20660. CK-S200-IP-ACL I/O and input AC control power mating connectors for base S200 AC drives S21260, S22460. CK-S200-IP-AC-TB Terminal block adaptor I/O connector and input power mating connectors for base S200 AC drives S20260, S20360, S20660. CK-S200-IP-ACL-TB Terminal block adaptor I/O connector and input AC control power mating connectors for base S200 AC drives S21260, S22460. CK-S200-SQ Option card SynqNet (-SRS, -SDS) I/O, Aux Feedback mating connectors. CK-S200-SQ-TB Option card SynqNet (-SRS, -SDS) terminal block adaptors for I/O, Aux Feedback. CK-S200-CNDN Option card CD/DN and I/O mating connectors for S200. CK-S200-CNDN-TB Option card CD/DN and I/O mating connectors, terminal block adaptors for I/O and feedback connector for S200.