High Quality Commercial Charcoal Briquette Making Machine Perfect Charcoal Briquette Making Machine

 (1) Outer stove

includes heating room (for heating the inner stove), furnace body and heat-keeping layer (it is made of the heat insulating material)

(2) Inner stove
Consist of the stove tank body and the sealed top cap. They are made of the heat resistance thermal steel, three inner stove can be stacked together for saving space and shipping cost.

(3) Smoking recycle tube
During the process of carbonizing, there will be some smoke.( can be burning) the smoke can be collected and returned to the furnace.

(4) Purification tank
This system is consisting of purification tank and the exhaust-heated cycle pipe.

(5) Hoisting equipment
it include the steel hoisting frame and the E-hoist .And it is easy for loading and unloading the stove.

Operation instruction about High Quality Commercial Charcoal Briquette Making Machine Perfect Charcoal Briquette Making Machine

1.Installation
Install the pipes correctly according to the numbers indicated, then place the furnace in the appropriate area to start production.

2. Preparation
-Remove from the oven and place it near the coal storage area.
-Open the oven lid, tilt it and place raw coal in the oven.
-When finished, cover the oven and lift it into the stove.
-Cover the edges with sand and then start carbonizing.

3. carbonization

Ignite and start carbonization, which is performed by carbonization technology.

4. After carbonization
After the carbonization is completed, adjust the smoke valve to stop the carbonization in the oven to complete the carbonization.

5. Sealed cooling
Cover the oven and cool it in a cooling area.

6.recycled carbon
Add another prepared oven and continue to carbonize. The procedures and techniques are the same as those described above.

7. Remove the carbonized material
After the carbide is completely cooled, open the attachment to completely remove it, and then place it in the raw material again for circular carbonization.

 1.Crush the raw material into small pieces (diameter is about 3-5mm);
2.Dry the material by machine or dried it in the sun , till the moisture is less than 12%;
3.Put the material into feed let of briquette machine;
4.Produce the briquette stick from biomass material without any additive;
5.Carbonized the briquette stick.

 *Crush: We have differetn types crusher deal to different raw materia and capacity , please tell me what is you raw material and you capacity.

*Dryer: We have different types deal to different moisture from 30-70% and different raw materia , please tell me what is you raw material and you capacity.

*Wood briquettes machine : we have differnt size briquettes from 50-80mm, please tell me what is you raw materia and you capacity and you applicationn then I can choose the best size for you .

*Air flow type carbonization stove : This kind of carbonization stove are include three inner stove,when one inner stove are finished, it can be hoisted outside,and when thefirstinner stove are cooling, the other inner stove can be carbonized at the same times, in this way the cooling time can be reduced much,thus, the productive efficiency increase a lot.

For one set we packed in  standard container.For more sets machines, we pack them in the standard container.

Gongyi Xiaoyi Mingyang Machinery plant is located in Zhengzhou.Henan province. Our machineryplant is specialize in WOOD BRIQUETTE MACHINE 26 years. 

 There have production line of makingwood charcoal briquette(including crusher , dryer , wood briquette machine, carbonization stove) , 

production line of making wood pellet (including crusher, dryer , wood pellets machine , dust separation plant and packaging machine) 

production line of making coal ball briquette(includingvertical crusher, mixing machine, coal briquette pressing machine and dryer machine for coal briquette) 

and other equipment such as screw conveyor, belt conveyor, scrap conveyor , sawdust carbonization stove, floating fish feed machine and so on.

 Our machines have the best quality and we have got many certification such as CE, ISO, BV.

1.Are you a manufacturer or trading company? 

We are the manufacturer. and we have our own factory. ANd our factory name is Gongyi Xiaoyi Mingyang Machinery Plant.

2.What's your payment terms?
T/T, LC, Trade Assurance, West Union or negotiation.

3.what's your MOQ?
The MOQ is 1 set.
4.What's the delivery time?

We will deliver the product in 3-20 days after the contract.

5.How about the quality of your product?
Our products manufactured strictly according to national and international standard. We take a test on every product before delivery.

6.How about price of this product? 
We can give the lowest price than market.We do quotation as soon as possible for any customer. Discount can be given according to quantity.

7.How about the after-sale service of your company?
Our engineer is available to service machinery overseas.The guarantee period of our product is one year.(except damageable and artificial).