Melting 1 ton copper gas furnace, copper waste melting furnace

As the largest consumer of copper in the world, copper smelting is very important, and gas copper melting furnace is a necessary equipment for copper smelting. Gas copper melting furnace is fueled by natural gas (or liquefied petroleum gas), which is more economical and environmentally friendly. Power supply power in 80-2500KW, common for copper and brass or copper alloy as raw materials, copper melting after the common products are copper rod, copper ingot, copper bar or electronic products with parts.

What kind of furnace is good to use in the end, gas copper furnace must be the first choice

The installation and operation of gas copper melting furnace is very convenient and easy to learn. 24 hours uninterrupted melting capacity, saving energy. Totally different from the traditional medium frequency power supply, power loss, energy saving. As the world's largest copper consumer, combined with the development of copper applications in the future, China will become one of the benchmark of economic growth rate.

Copper melting furnace, medium frequency electric furnace copper melting furnace, power supply in 80~2500KkW, melting capacity of 0.05T-5T, high efficiency, main use: copper metal material melting, with electromagnetic stirring force to make metal melting uniform melting, without adding other stirring process.

Now the market needs copper melting furnace generally according to its process requirements (on raw materials and product quality), common for copper and brass or copper alloy as raw materials, common products after copper melting copper rod, copper ingot, copper row, electronic products with parts. Small copper melting converter can be used in factories with small copper quantity or factories with low quality requirements for copper products.

Before starting the copper melting furnace, check whether the electrical equipment, water cooling system, inductor copper pipe and so on are in good condition. Otherwise, it is forbidden to start the furnace. Secondly, the melting loss in the furnace should be repaired in time in excess of the provisions, and it is strictly prohibited to melt in the crucible with too deep melting loss. Special personnel shall be responsible for power transmission and furnace opening. Contact with inductor and cable shall be strictly prohibited after power transmission. On duty shall not leave the post without permission, always pay attention to the sensor and crucible external conditions.