Small smelting equipment, 5T tilting rotary furnace with fast temperature rise

What are the advantages of 5-ton rotary furnace and tilting rotary furnace?

(1) The advantages of aluminum slag treatment are particularly obvious. Compared with the traditional rotary furnace, the operation safety is greatly improved. The service life can be almost doubled, and the recovery rate of aluminum in slag can be as high as 80%, increasing by more than 20 percentage points:

(2) It is especially suitable for the treatment of light and thin wastes, such as waste aluminum foil, and the recovery rate can be increased by more than 5%.

(3) The amount of slag forming agent used in the smelting process waste of this furnace in aluminum processing plant can be reduced by 50% compared with that of reverberatory furnace.

(4) The production efficiency of zinc cleaning treatment is 50% higher than that of reverberatory furnace.

(5) When recovering lead from lead storage battery, the charging amount can be three times that of reverberatory furnace, so the production efficiency can be increased by 7200%.

(6) In addition, the furnace has also achieved good benefits in recovering and treating platinum from platinum slag, and the energy saving alone can reach 25%.

With the progress and development of modern science and technology, the of dumping rotary furnace has been fully applied and more and more convenient. It has also greatly improved the work efficiency in industry. At the same time, it has also been highly praised.

At present, the size of the furnace mouth of the tilting rotary furnace is 1000 mm x 2000 mm, and the models of the furnace door are diversified to meet different production needs, such as fixed rotary furnace door, follow-up rotary furnace door and follow-up two-piece furnace door. The inclined furnace door is installed on the heat-resistant cast iron frame and can move obliquely with the furnace body. The tilting rotary furnace is still closed when discharging aluminum melt, which can not only save energy, maintain furnace temperature, but also reduce burning loss. The two-piece furnace door can also sample and add raw materials under the working state of the burner to adjust the melt composition. Fixed furnace door with slag stopper can prevent slag from flowing into ladle with melt and polluting aluminum melt.