5052 Industrial aluminum sheets 5052 environmental protection equipment mechanical processing aluminum alloy sheets laser cutting 3003 aluminum sheet

?Size: Product thickness: 8.0-300mm  

?, width, width: 100-2650mm  

? Service features: Original warranty, 7-45 days delivery, global export  

? Application: Mold, machining, silo, engraving aluminum plate, etc  

The Country of origin is China  

Brand: Juye  

-Penny: You know what?  

Product Introduction:  

-Chuck: I Use it for you.  

Rolling mode and characteristics of 5052 aluminum plate  

Width of 5052 aluminum plate is hot rolled aluminum plate, hot-rolled ingot specification is usually only a few width, it can't adapt to the requirement of all kinds of 5052 aluminum alloy plate finished width, so hot roughing rolling way is relatively complex, mainly is the longitudinal rolling, rolling, transverse and longitudinal rolling and skew rolling rolling four ways, in the daily production, often cross use this a number of ways, in order to obtain the proper width of rolled piece.  

Two different rolling ways of 5052 aluminum plate  

1. Longitudinal rolling: it is the way of rolling along the length of the ingot. This rolling method is a simple one, when the width of the ingot meets the width of the finished product and the cutting amount of each process, this rolling method is used.  

2. Cross rolling is rolled according to the direction of the width of the ingot, this rolling method is suitable for 5052 aluminum plate product width is much larger than the width of the ingot, the general ingot width more than the width of the finished product 400mm is used in this way, that is, first cross rolling, and then turn to 90 longitudinal rolling a rolling method,  This rolling method is suitable for the width of the ingot is less than the width of the finished product, but the width difference is less than 40m.  Cross rolling means that the length of the ingot and the rolling direction enter the rolling mill at a certain Angle to open the blank. When the width of the rolled piece meets the requirements of the product, the production mode of longitudinal rolling is carried out.  Because of the large deformation of soft alloy passes and high temperature, it is especially suitable for this rolling method to solve the problems of small ingot and low yield caused by cross rolling.  

Several important factors affecting aluminum plate rolling  

The rolling process includes hot roughing and hot finishing.  In the rolling process, it is mainly the interaction between roller, rolled piece and emulsion, and the tension control of edger rolling outside the roll gap.  Roll selection Roll is a valuable cylindrical tool on the rolling mill to bear rolling force and uniformly reduce the thickness of rolling material.  During the use of the roll, the roll surface is embossed, sticky, or changed materials, etc., generally should be replaced, according to the requirements of re-grinding can be put into use again.  

Product introduction  

5052B aluminum plate, new low-carbon environmental protection Al-Mg alloy, tensile strength: 200MPa+, yield strength: 120-140mpa, elongation 16%+, with good milling, cutting, engraving and other deep processing properties, suitable for mold manufacturing, machining parts production, excellent surface oxidation coloring performance.  

5052B aluminum plate advantage  

Juye 5052 aluminum plate excellent performance, price concessions, recognized by users.  

5052 aluminum plate manufacturer strength  

Juye Aluminum can undertake 8-5000 tons, 5052 aluminum plate orders, customized, 7-35 days delivery, stable product quality, global exports, affordable prices, you can rest assured purchase!  

Typical alloy 5052B aluminum plate  

Material state F,O,H12,H14,  

H16,H18,H19,  

H22,H24,H26,  

H28,H32,H34,  

H36,H38,H111,  

H112,H114  

Thickness (mm) 8.0-300  

Width (mm) 20-2650  

Length (mm) 500-16000  

Typical products mould, machining, silo, carving aluminum plate, etc  

Product use