- Hunan Addition Instruments and Apparatus Co., Ltd.
-
Changsha, Hunan, China
- Main products: Pour Point and Cold Filter Plugging Point Tester, Kinematic Viscosity Tester , Biodiesel Oxidation Stability Tester , Lubricating Oil Evaporation Loss Tester, Automatic?Apparent?Viscosity?of Engine?Oils Tester , Borderline Pumping Temperature of Engine Oil Tester, Low Temperature Brookfield Viscosity Tester, Automatic Cleanliness of Oil Tester , Automatic Oil Cleanliness Tester , Gel Index of Lubricating Oil Tester , Automatic Octane Number of Engine Fuel Tester , Vapor Pressure of Petroleum Products Tester
Home > Products > Lubricant Series > ASTMD6184 Oil Separation from Lubricating Grease of Steel Mesh Tester grease separator oil distributor instrument
ASTMD6184 Oil Separation from Lubricating Grease of Steel Mesh Tester grease separator oil distributor instrument
Negotiable
/ Set
1 Set(Min.Order)
- 100 Set / Sets per Month
- T/T L/C
You May Like
-
ASTM D4289 Compatibility of Synthetic Rubber and Grease Tester NEOPRENE consistency analyzer
-
ASTM D4310 Sludging and Corrosion Tendencies of Inhibited Mineral Oils Tester lubricant Sludge tendency analyzer
-
ASTM D1401 Water Separability of Petroleum Oils and Synthetic Fluids Tester separation property analyzer
-
JISK2246 Water Displacement of Anti-rust Oil Tester antirust oil and water displacement analyzer
-
DIN 51805 Flow Pressure of Lubricating Greases Tester grease streaming pressure analyzer
-
Thermal Stability Of Polyethylene Pipes And Fittings Tester Oxidation Induction Period PE Xbpe pipe material OIT equipment
Product Description
Oil Separation from Lubricating Grease of Steel Mesh Tester ASTM D6184
Product model: JF0324
Product Introduction:
The grease steel mesh oil separator is designed and manufactured in accordance with the national standard SH/T 0324 "Determination of Grease Steel Mesh Oil Separation (Static Method)", which is suitable for measuring the oil separation tendency of grease at elevated temperatures. The test method is: install 10g sample in a metal wire steel mesh, at 100℃±1℃ in a static state, after 30h, measure the mass percentage of oil flowing out through the steel mesh.
Product parameter
1. Stainless steel wire mesh: 60 mesh (55696 holes/dm3, the diameter of the wire is about 0.19mm, the pore is about 0.28mm), with metal wire lifting beams.
2. Beaker: high type, no mouth, 200ml.
3. Cup lid: tightly integrated with the cup, there is a hook at the center of the bottom of the lid.
Configuration
1. Stainless steel wire mesh
2. High type 200ml beaker without mouth
3. Cup lid with hook
Contact Us
- Hunan Addition Instruments and Apparatus Co., Ltd.
- Contact nameMitty Chat Now
- Phone86-131-07412212
- AddressChangsha county, Changsha, Hunan
Product Categories
New Products
-
ISO11171 ISO4406 Automatic Cleanliness of Oil Tester lubricant turbidity test analyzer
-
DIN51352 Ageing Characteristics Of Lubricating Oils Tester lubricant Alterungseigenschaft Deteriorative characteristics analyzer
-
DIN51568 Ability to Flow of Lubricating Oils Tester lubricant liquidity analyzer petroleum Mobility equipment
-
DIN51351 Floc Point of Refrigerator Oils Tester refrigerating fulid flocculation point Analyzer
-
ASTM D2983 ASTM D11145 Low Temperature Brookfield Viscosity Tester hypothermia Brookfield RVT analyzer
-
ASTM D665 ISO7120 Rust-Preventing Characteristics in the Presence of Water Tester lubricant rust protection analyzer
-
ASTM D3829 D4684 Full Automatic Borderline Pumping Temperature of Engine Oil Tester MRV transportation through pump analyzer
-
Petroleum Products Colorimeter lubricant tintometer chromoscope analyzer
-
Insoluble Matter of Lubricating Oil Tester lubricant undissolved substance equipment insoluble substance instrument
-
ASTM D2711 Demulsibility Characteristics of Lubricating Oils Tester lubricant emulsion resistance analyzer
-
ASTM D972 Evaporation Loss of Lubricating Greases and Oils Tester lubricant loss on heating analyzer
-
ASTM D2602 D5293 Automatic Apparent Viscosity of Engine Oils Tester Low Temperature Dynamic Viscosity Tester
-
ASTM D566 ISO2176 NFT60102 Dropping Point of Lubricating Grease Tester lubricant melting point analyzer
-
ASTM D92 Fully Automatic Open Flash And Fire Points Tester open cup flash point and ignition point analyzer
-
ASTM D2265 ISO6299 Dropping Point of Lubricating Grease Over Wide Temperature Range Tester melting point analyzer
-
Lubricant Anti-Wear Performance Tester Four-Ball Wear Tester lubricant resistance to wear analyzer antifraying equipment
-
Coking Solid Quinoline Insoluble Matter Tester QI analyzer
-
ISO11171 Portable Oil Particle Counter PAMAS equipment GJB-420A, GJB-420B, NAS1638, ISO4406, SAE4059E TOCT17216
-
ASTM D4693 Low-Temperature Torque of Grease-Lubricated Wheel Bearings Tester Angular moment analyzer
-
ISO 13357 Filterability of Lubricating Oil Tester lubricant filterableness analyzer
-
ASTM D3527 Full Automatic Life Performance of Automotive Wheel Bearing Grease Tester lubricating grease life analyzer
-
Gel Index of Lubricating Oil Tester lubricant Colloid index analyzer
-
ASTM D6186 Oxidation Induction Time of Lubricating Oils Tester Pressure Differential Scanning Calorimetry
-
ASTM D4170 Fretting Wear Protection by Lubricating Greases Tester lubricant resistance to wear equipment antifraying analyzer
Popular Searches
- digital tester
- Resistance Tester
- electrical instrument
- test instrument
- lab equipment
- analysis instrument
- laboratory instrument
- Asphalt Mixture Mixer
- launch x431 master
- x431
- Gloss Meter
- Resistance Meter
- digital instrument
- dc load bank
- testing equipment
- testing machine
- battery load bank
- Circuit Tester
- Impact Tester
- lab instrument
- weather station
- gps receiver
- laboratory instruments
- test equipment
- laboratory equipment
- electronic timer
- electronic meter
- electronic instrument
- Electricity Meter
- data collector
Recommended Products
- paint and metal cupping tester for export
- ISO 1520 cupping index tester supplier ISO 20482 cupping depth tester manufacturer
- dual standard cupping testing machine ISO 1520 ISO 20482 universal cupping tester for coating and metal standards
- EN ISO 1520 compliant cupping test machine cupping tester for ISO 1520 and ISO 20482
- JIS K 5600-5-1 cupping test machine EN ISO 1520 cupping tester EN standard coating flexibility tester
- ASTM coating deformation tester paint flexibility testing equipment JIS K 5600
- DIN 53166 compliant cupping tester ASTM cupping tester ASTM D4175 cupping test machine
- ISO 20482 formability test machine DIN 53166 cupping tester paint film cupping testing machine
- ISO 20482 ductility testing machine Erichsen cupping test equipment metallic materials cupping tester
- ISO 1520 compliant cupping testing machine ISO 20482 metal cupping tester sheet metal cupping test machine
- ISO 1520 lacquer cupping test equipment standard paint film deformation tester paints and varnishes cupping tester
- ISO 1520 cupping tester paint cupping test machine coating flexibility tester
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
Hunan Addition Instruments and Apparatus Co., Ltd.
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Hunan Addition Instruments and Apparatus Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
Mitty
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile